STLink is used to program STM32 CPUs on various ARM boards via a SWD interface.

cd /opt/src/
apt-get install cmake libusb-1.0-0-dev
git clone https://github.com/stlink-org/stlink
cd stlink
cmake .
make
make install
cp config/udev/rules.d/49-stlinkv* /etc/udev/rules.d/
cp config/modprobe.d/stlink_v1.conf /etc/modprobe.d/

A simple way to test a device is to read and discard the data from it.

st-flash read /dev/null 0

Various boards have been tested in this manner below.

vcc-gnd (STM32F103R8)

 INFO src/stlink-common.c: Loading device parameters....
 INFO src/stlink-common.c: Device connected is: F1 Medium-density device, id 0x20036410
 INFO src/stlink-common.c: SRAM size: 0x5000 bytes (20 KiB), Flash: 0x10000 bytes (64 KiB) in pages of 1024 bytes

Maple mini clone (STM32F103R8)

 INFO src/stlink-common.c: Loading device parameters....
 INFO src/stlink-common.c: Device connected is: F1 Medium-density device, id 0x20036410
 INFO src/stlink-common.c: SRAM size: 0x5000 bytes (20 KiB), Flash: 0x20000 bytes (128 KiB) in pages of 1024 bytes

Nucleo STM32F302 (STM32F302R8T6)

 INFO src/stlink-common.c: Loading device parameters....
 INFO src/stlink-common.c: Device connected is: F3 small device, id 0x10016439
 INFO src/stlink-common.c: SRAM size: 0xa000 bytes (40 KiB), Flash: 0x10000 bytes (64 KiB) in pages of 2048 bytes

Nucleo STM32F411 (STM32F411RET6)

 INFO src/stlink-common.c: Loading device parameters....
 INFO src/stlink-common.c: Device connected is: F4 device (low power) - stm32f411re, id 0x10006431
 INFO src/stlink-common.c: SRAM size: 0x20000 bytes (128 KiB), Flash: 0x80000 bytes (512 KiB) in pages of 16384 bytes

STM32F4 Discovery (STM32F407VGT6)

 INFO src/stlink-common.c: Loading device parameters....
 INFO src/stlink-common.c: Device connected is: F4 device, id 0x10016413
 INFO src/stlink-common.c: SRAM size: 0x30000 bytes (192 KiB), Flash: 0x100000 bytes (1024 KiB) in pages of 16384 bytes

STM32 Value Line Discovery (STM32F100RBT6B)

 INFO src/stlink-common.c: Loading device parameters....
 INFO src/stlink-common.c: Device connected is: F1 Medium/Low-density Value Line device, id 0x10016420
 INFO src/stlink-common.c: SRAM size: 0x2000 bytes (8 KiB), Flash: 0x20000 bytes (128 KiB) in pages of 1024 bytes

STM32F030 DEMO BOARD V1.0 (STM32F030F4P6)

 INFO src/stlink-common.c: Loading device parameters....
 INFO src/stlink-common.c: Device connected is: F0 small device, id 0x10006444
 INFO src/stlink-common.c: SRAM size: 0x1000 bytes (4 KiB), Flash: 0x4000 bytes (16 KiB) in pages of 1024 bytes

Programming interface

For these programming interfaces two jumpers must be removed to disable the internal board connections and allow external programming.

Target interface