This is an old revision of the document!
Table of Contents
Maple mini boot loader
Leaflabs have a repository for the maple boot loader and pre-built binaries, however, the repository does not contain working code for the Maple mini or it's clones.
A patched version of the Maple boot loader for the mini exists elsewhere and this appears to operate.
Install
Install this compiler and the STLink programmer.
git clone https://github.com/rogerclarkmelbourne/Arduino_STM32 cd Arduino_STM32/other/maple-bootloader make TCHAIN=/embedded/arm-cortex/gcc-arm-none-eabi-4_9-2014q4/bin/arm-none-eabi st-flash write build/maple_boot.bin 0x8000000
Test
To communicate with the boot loader [:tools:dfu-util|dfu-util]] can be installed and used.
After initial installation of the boot loader and the first reset, dfu-util will fail to operate correctly until the mini is reset once again.
The first time we query the device we will get the following.
Found DFU: [1eaf:0003] ver=0201, devnum=85, cfg=1, intf=0, alt=1, name="UNKNOWN", serial="UNKNOWN" Found DFU: [1eaf:0003] ver=0201, devnum=85, cfg=1, intf=0, alt=0, name="UNKNOWN", serial="UNKNOWN"
Subsequent queries work as expected.
Found DFU: [1eaf:0003] ver=0201, devnum=88, cfg=1, intf=0, alt=1, name="DFU Program FLASH 0x08005000", serial="LLM 003" Found DFU: [1eaf:0003] ver=0201, devnum=88, cfg=1, intf=0, alt=0, name="DFU Program RAM 0x20000C00", serial="LLM 003"
