This is an old revision of the document!


Table of Contents

WireGuard

Easy to setup VPN

Install

This install may replace the kernel, if so, reboot afterward.

apt update
apt full-upgrade
apt install wireguard

Setup

Log

Setup VPN

Host 1 and Host 2
ip link add dev wg0 type wireguard
Host 1
ip address add dev wg0 192.168.44.10 peer 192.168.44.11
Host 2
ip address add dev wg0 192.168.44.11 peer 192.168.44.10
Host 1 and Host 2
cd /etc/wireguard
wg genkey | tee private-key | wg pubkey > public-key
touch wg0.conf
chmod 600 *
ls -1
private-key
public-key
wg0.conf

/etc/wireguard/wg.conf

[Interface]
ListenPort = 1234
PrivateKey = PRIVATE-KEY

[Peer]
PublicKey = PUBLIC-KEY
AllowedIPs = 0.0.0.0/0
Endpoint x.x.x.x:1234

Create VPN

wg setconf wg0 /etc/wireguard/wg0.conf
ip link set up dev wg0
Host 1
ping -c 1 192.168.44.11
PING 192.168.44.11 (192.168.44.11) 56(84) bytes of data.
64 bytes from 192.168.44.11: icmp_seq=1 ttl=64 time=30.4 ms

--- 192.168.44.11 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 30.409/30.409/30.409/0.000 ms
Host 2
ping -c 1 192.168.44.10
PING 192.168.44.10 (192.168.44.10) 56(84) bytes of data.
64 bytes from 192.168.44.10: icmp_seq=1 ttl=64 time=30.4 ms

--- 192.168.44.10 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 30.359/30.359/30.359/0.000 ms
Host 1 and Host 2

Destroy VPN

ip link delete dev wg0
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies