This is an old revision of the document!
Table of Contents
WireGuard
Work-in-progress
Install
This install may replace the kernel, if so, reboot afterward.
apt update apt full-upgrade apt install wireguard
Setup
Log
Host 1 and Host 2
ip link add dev wg0 type wireguard
Host 1
ip address add dev wg0 192.168.44.10 peer 192.168.44.11
Host 2
ip address add dev wg0 192.168.44.11 peer 192.168.44.10
Host 1 and Host 2
cd /etc/wireguard wg genkey | tee private-key | wg pubkey > public-key touch wg0.conf chmod 600 * ls -1 private-key public-key wg0.conf
/etc/wireguard/wg.conf
[Interface] ListenPort = 1234 PrivateKey = PRIVATE-KEY [Peer] PublicKey = PUBLIC-KEY AllowedIPs = 0.0.0.0/0 Endpoint x.x.x.x:1234
wg setconf wg0 /etc/wireguard/wg0.conf
