This is an old revision of the document!


Table of Contents

Maple mini boot loader

Leaflabs have a repository for the maple boot loader and pre-built binaries, however, the repository does not contain working code for the Maple mini or it's clones.

A patched version of the Maple boot loader for the mini exists elsewhere and this appears to operate.

Install

Install this compiler and the STLink programmer.

git clone https://github.com/rogerclarkmelbourne/Arduino_STM32
cd Arduino_STM32/other/maple-bootloader
make TCHAIN=/embedded/arm-cortex/gcc-arm-none-eabi-4_9-2014q4/bin/arm-none-eabi
st-flash write build/maple_boot.bin 0x8000000

Test

After installing the boot loader and resetting, dfu-util will fail to operate correctly until the mini is reset once again. The first time we query the device we will get the following.

Found DFU: [1eaf:0003] ver=0201, devnum=85, cfg=1, intf=0, alt=1, name="UNKNOWN", serial="UNKNOWN"
Found DFU: [1eaf:0003] ver=0201, devnum=85, cfg=1, intf=0, alt=0, name="UNKNOWN", serial="UNKNOWN"

Subsequent queries work as expected.

Found DFU: [1eaf:0003] ver=0201, devnum=88, cfg=1, intf=0, alt=1, name="DFU Program FLASH 0x08005000", serial="LLM 003"
Found DFU: [1eaf:0003] ver=0201, devnum=88, cfg=1, intf=0, alt=0, name="DFU Program RAM 0x20000C00", serial="LLM 003"
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies