This is an old revision of the document!


Table of Contents

ESPTool

esptool.jpg

This tool is used to install firmware onto ESP-XX modules.

Install

git clone https://github.com/espressif/esptool
cd esptool
apt-get install python3-serial python3-setuptools
python3 setup.py install

Wiring

3V3 UART       ESP-XX   ESP-01
========       ======   ======
3V3 ---------- VDD      8   21
3V3 -- 10K --- CHIP_EN  4   43
GND ---------- GND      1   65
                            87
RX  -- 390R -- U0TXD    2
TX  -- 390R -- U0RXD    7

RTS -- 390R -- EXT_RSTB 6
DTR -- 390R -- GPIO0    5

Use resistors for protection against mis-wiring.

Usage

$ esptool.py -p /dev/ttyUSB0 read_mac
esptool.py v2.0-beta2
Connecting....
Detecting chip type... ESP8266
Uploading stub...
Running stub...
Stub running...
MAC: 18:fe:34:XX:XX:XX
Hard resetting...
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies