This is an old revision of the document!


Table of Contents

avrdude

Programmer for ATMEL ISP and STK500 boot loaders.

Arduino

Query ATMEGA328

avrdude -P /dev/ttyUSB1 -c arduino -p ATMEGA328P -b 115200

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)

avrdude: safemode: Fuses OK (E:00, H:00, L:00)

avrdude done.  Thank you.

Query ATMEGA2560 (may require a manual RESET)

avrdude -P /dev/ttyUSB1 -c stk500v2 -p ATMEGA2560 -b 115200

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e9801 (probably m2560)

avrdude: safemode: Fuses OK (E:FD, H:D8, L:FF)

avrdude done.  Thank you.
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies