This is an old revision of the document!


Table of Contents

Drive tests on Raspberry Pi 4

Expansion drive
$ lsusb
Bus 002 Device 002: ID 0bc2:231a Seagate RSS LLC Expansion Portable
$ dmesg
sd 0:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
sd 0:0:0:0: [sda] Attached SCSI disk

Bonnie++ benchmarks

USB3 dock
$ lsusb
Bus 002 Device 003: ID 174c:55aa ASMedia Technology Inc. Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub

Disc 1 (SDA)

$ dmesg

[    1.692788] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.693703] sd 0:0:0:0: [sda] Write Protect is off
[    1.693744] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    1.695463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.701792] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    1.732797]  sda: sda1
[    1.762785] sd 0:0:0:0: [sda] Attached SCSI disk

Smart data

Blank (sda and sdb in parallel)

$ dd if=/dev/zero of=/dev/sda bs=4M
dd: error writing '/dev/sda': No space left on device
19074+0 records in
19073+0 records out
80000000000 bytes (80 GB, 75 GiB) copied, 1699.79 s, 47.1 MB/s
28:19.79s

Bonnie++ benchmarks

FIO benchmarks

Disc 2 (SDB)

dmesg

[    1.710381] sd 0:0:0:1: [sdb] 160086528 512-byte logical blocks: (82.0 GB/76.3 GiB)
[    1.715480] sd 0:0:0:1: [sdb] Write Protect is off
[    1.715543] sd 0:0:0:1: [sdb] Mode Sense: 43 00 00 00
[    1.725829] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.727300] sd 0:0:0:1: [sdb] Optimal transfer size 33553920 bytes
[    1.770316]  sdb: sdb1
[    1.777180] sd 0:0:0:1: [sdb] Attached SCSI disk

Smart data

Blank (sda and sdb in parallel)

$ dd if=/dev/zero of=/dev/sdb bs=4M

dd: error writing '/dev/sdb': No space left on device
19542+0 records in
19541+0 records out
81964302336 bytes (82 GB, 76 GiB) copied, 1758.59 s, 46.6 MB/s
29:18.59s

Bonnie++ benchmarks

FIO benchmarks

Disk 3 (2TB)

$ dmesg

[    1.706072] sd 0:0:0:1: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.707256] sd 0:0:0:1: [sdb] Write Protect is off
[    1.707293] sd 0:0:0:1: [sdb] Mode Sense: 43 00 00 00
[    1.709737] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.716606] sd 0:0:0:1: [sdb] Optimal transfer size 33553920 bytes
[    1.789934] sd 0:0:0:1: [sdb] Attached SCSI disk

Blank

$ dd if=/dev/zero of=/dev/sdb bs=4M

dd: error writing '/dev/sdb': No space left on device
476933+0 records in
476932+0 records out
2000398934016 bytes (2.0 TB, 1.8 TiB) copied, 18988.7 s, 105 MB/s
5:16:28.70s

Disk 4 (500G)

$ dmesg

[    1.659321] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.665512] sd 0:0:0:0: [sda] Write Protect is off
[    1.665542] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    1.677927] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.679643] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    1.756644] sd 0:0:0:0: [sda] Attached SCSI disk

Blank

$ dd if=/dev/zero of=/dev/sda bs=4M

dd: error writing '/dev/sda': No space left on device
119236+0 records in
119235+0 records out
500107862016 bytes (500 GB, 466 GiB) copied, 6602.9 s, 75.7 MB/s
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies