You are here: start » tools » yocto

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools:yocto [2023/08/17 15:32] – [Fixes for meta-st-stm32mp] darrontools:yocto [2023/08/17 15:35] (current) – [Boot] darron
Line 73: Line 73:
 git mv recipes-devtools/gcc/gcc-source_12.2.bbappend recipes-devtools/gcc/gcc-source_12.3.bbappend git mv recipes-devtools/gcc/gcc-source_12.2.bbappend recipes-devtools/gcc/gcc-source_12.3.bbappend
 </code> </code>
 +
 +NB the above is a known but unaddressed issue
  
 ==Dev tools== ==Dev tools==
Line 130: Line 132:
 </code> </code>
  
-NB the above is a known but unaddressed issue+NB the correct solution would be to update the compiler
 ===Configure=== ===Configure===
  
Line 295: Line 297:
 ./scripts/create_sdcard_from_flashlayout.sh flashlayout_core-image-full-cmdline/optee/FlashLayout_sdcard_stm32mp157d-dk1-optee.tsv ./scripts/create_sdcard_from_flashlayout.sh flashlayout_core-image-full-cmdline/optee/FlashLayout_sdcard_stm32mp157d-dk1-optee.tsv
 sudo dd if=FlashLayout_sdcard_stm32mp157d-dk1-optee.raw of=/dev/sdc bs=4M conv=fdatasync,notrunc status=progress sudo dd if=FlashLayout_sdcard_stm32mp157d-dk1-optee.raw of=/dev/sdc bs=4M conv=fdatasync,notrunc status=progress
 +sleep 1
 sudo hdparm -z /dev/sdc sudo hdparm -z /dev/sdc
 </code> </code>
Line 734: Line 737:
 </code> </code>
  
 +It appears that the power controller is probed before the I2C interface is online and consequently it doesn't work
 ===Extra=== ===Extra===