You are here: start » tools » usbloadergx

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools:usbloadergx [2015/03/28 13:24] – [USB] darrontools:usbloadergx [2015/06/17 12:01] (current) – [USB Loader] darron
Line 9: Line 9:
 settings and write down the MAC address of the console. settings and write down the MAC address of the console.
  
-Format a USB drive using FAT32. Use gparted in Linux, Windows won't+Format a 2GB SDCARD and a much larger USB drive as FAT32. Use gparted in Linux, Windows won't
 work for big drives. work for big drives.
  
Line 17: Line 17:
 HackMii bundle using the data gathered above. HackMii bundle using the data gathered above.
  
-Copy the files onto a 2GB SDCARD and load into the console.+Copy the files onto the 2GB SDCARD and load into the console.
  
 Visit the messages section and open the message with the red bomb icon. Visit the messages section and open the message with the red bomb icon.
  
 Install the Homebrew channel and BootMii applications from Install the Homebrew channel and BootMii applications from
-the menu. +the menu. On early Wiis we can install BootMii in the bootloader 
 +and as an IOS, for later Wiis, only as an IOS.
 === BootMii === === BootMii ===
  
Line 38: Line 38:
 I haven't used this backup but it seems sensible to create this. I haven't used this backup but it seems sensible to create this.
  
-=== Loader ===+=== Priiloader === 
 + 
 +From the Homebrew channel install priiloader. This will be used 
 +via the RESET button to jump into the the Homebrew channel in 
 +case of any emergencies. This is important when we cannot patch 
 +the bootloader. 
 + 
 +=== USB Loader ===
  
-Fetch `d2x cIOS Installer v3.1.zip' and store on SDCARD, likewise+Fetch `d2x cIOS Installer v3.1.zip' and unzip on SDCARD, likewise
 fetch `USBLoader_GX_V3_0_AllinOnePackage_IOS249.zip' and do the fetch `USBLoader_GX_V3_0_AllinOnePackage_IOS249.zip' and do the
-same.+same. Using 7zip, also update d2x with d2x-v10-beta52.zip
  
 These will be Homebrew applications. These will be Homebrew applications.
  
 Start up Wii and enter Homebrew, run d2x and install it into Start up Wii and enter Homebrew, run d2x and install it into
-IOS slot 249.+IOS slot 249 base 56. Also install IOS slot 250 base 57 if 
 +required.
  
 After a restart you can test USB Loader and begin ripping game After a restart you can test USB Loader and begin ripping game
-disks to the USB hard drive.+disks to the USB hard drive. If USB Loader can't find your USB 
 +drive, swap the USB port.
  
 === Launcher === === Launcher ===
  
-Download yet another Wii module manager `YAWMM.zip' and put on+Download yet another Wii module manager `YAWMM.zip' and unzip on
 SDCARD. SDCARD.