You are here: start » tools » stlink

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools:stlink [2022/10/20 16:22] – darrontools:stlink [2022/12/16 10:11] (current) – [Install] darron
Line 7: Line 7:
  
 === Install === === Install ===
 +
 +==Linux==
 +
 <code> <code>
 cd /opt/src/ cd /opt/src/
-apt-get install cmake libusb-1.0-0-dev+apt-get install build-essential git cmake libusb-1.0-0-dev 
 +rehash
 git clone https://github.com/stlink-org/stlink git clone https://github.com/stlink-org/stlink
 cd stlink cd stlink
-rehash 
 cmake . cmake .
 make make
 make install make install
 +ldconfig
 cp config/udev/rules.d/49-stlinkv* /etc/udev/rules.d/ cp config/udev/rules.d/49-stlinkv* /etc/udev/rules.d/
 cp config/modprobe.d/stlink_v1.conf /etc/modprobe.d/ cp config/modprobe.d/stlink_v1.conf /etc/modprobe.d/
Line 21: Line 25:
 udevadm trigger udevadm trigger
 </code> </code>
 +
 +On linux we can disable the built in mass storage devices STLINK compatible boards contain, see [[:boards:stm32vl|here]].
 +
 +==Windows==
 +
 +[[https://github.com/stlink-org/stlink/releases/download/v1.7.0/stlink-1.7.0-x86_64-w64-mingw32.zip]]
 +
  
 === Test === === Test ===
  
-A simple way to test a device is to read and discard the data from it.+A simple way to test a device is to read nothing from the device.
  
 <code> <code>
-st-flash read /dev/null 0+st-flash read /dev/null 0 0
 </code> </code>