Differences

This shows you the differences between two versions of the page.

--- tools:stlink [2020/08/07 03:57] – darron
+++ tools:stlink [2022/12/16 10:11] (current) – [Install] darron
@@ Line 7: / Line 7: @@
 === Install ===
+==Linux==
 <code>
-mkdir -p /opt/src
+cd /opt/src/
-cd /opt/src
+apt-get install build-essential git cmake libusb-1.0-0-dev
-git clone https://github.com/texane/stlink.git
+rehash
-cd /opt/src/stlink
+git clone https://github.com/stlink-org/stlink
-sh autogen.sh
+cd stlink
-apt-get install libusb-1.0-0-dev
+cmake .
-./configure --prefix=/usr/local
 make
 make install
-cp 49-stlinkv* /etc/udev/rules.d/
+ldconfig
-cp stlink_v1.modprobe.conf /etc/modprobe.d/
+cp config/udev/rules.d/49-stlinkv* /etc/udev/rules.d/
+cp config/modprobe.d/stlink_v1.conf /etc/modprobe.d/
+udevadm control --reload-rules
+udevadm trigger
 </code>
+On linux we can disable the built in mass storage devices STLINK compatible boards contain, see [[:boards:stm32vl|here]].
+==Windows==
+[[https://github.com/stlink-org/stlink/releases/download/v1.7.0/stlink-1.7.0-x86_64-w64-mingw32.zip]]
 === Test ===
-A simple way to test a device is to read and discard the data from it.
+A simple way to test a device is to read nothing from the device.
 <code>
-st-flash read /dev/null 0
+st-flash read /dev/null 0 0
 </code>