Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
tools:stlink [2017/03/09 05:53] – [Test] darrontools:stlink [2022/12/16 10:11] (current) – [Install] darron
Line 1: Line 1:
 ==== STLink ==== ==== STLink ====
 <wrap right> <wrap right>
-{{:tools:stlink-mini.jpg?200}}+{{:tools:stlink-mini.jpg?100}}
 </wrap> </wrap>
  
Line 7: Line 7:
  
 === Install === === Install ===
 +
 +==Linux==
 +
 <code> <code>
-mkdir -p /opt/src +cd /opt/src/ 
-cd /opt/src +apt-get install build-essential git cmake libusb-1.0-0-dev 
-git clone https://github.com/texane/stlink.git +rehash 
-cd /opt/src/stlink +git clone https://github.com/stlink-org/stlink 
-sh autogen.sh +cd stlink 
-apt-get install libusb-1.0-0-dev +cmake .
-./configure --prefix=/usr/local+
 make make
 make install make install
-cp 49-stlinkv* /etc/udev/rules.d/ +ldconfig 
-cp stlink_v1.modprobe.conf /etc/modprobe.d/+cp config/udev/rules.d/49-stlinkv* /etc/udev/rules.d/ 
 +cp config/modprobe.d/stlink_v1.conf /etc/modprobe.d/ 
 +udevadm control --reload-rules 
 +udevadm trigger
 </code> </code>
 +
 +On linux we can disable the built in mass storage devices STLINK compatible boards contain, see [[:boards:stm32vl|here]].
 +
 +==Windows==
 +
 +[[https://github.com/stlink-org/stlink/releases/download/v1.7.0/stlink-1.7.0-x86_64-w64-mingw32.zip]]
 +
  
 === Test === === Test ===
  
-A simple way to test a device is to read and discard the data from it.+A simple way to test a device is to read nothing from the device.
  
 <code> <code>
-st-flash read /dev/null 0+st-flash read /dev/null 0
 </code> </code>
  
 Various boards have been tested in this manner below. Various boards have been tested in this manner below.
  
-The [[:boards:vcc-gnd|vcc-gnd]].+[[:boards:vcc-gnd|vcc-gnd]] (STM32F103R8)
 <code> <code>
  INFO src/stlink-common.c: Loading device parameters....  INFO src/stlink-common.c: Loading device parameters....
Line 38: Line 50:
 </code> </code>
  
-The [[:boards:maple|Maple mini]] clone (pictured).+[[:boards:maple|Maple mini]] clone (STM32F103R8)
 <code> <code>
  INFO src/stlink-common.c: Loading device parameters....  INFO src/stlink-common.c: Loading device parameters....
Line 45: Line 57:
 </code> </code>
  
-The Nucleo STM32F302+Nucleo STM32F302 (STM32F302R8T6)
 <code> <code>
  INFO src/stlink-common.c: Loading device parameters....  INFO src/stlink-common.c: Loading device parameters....
Line 52: Line 64:
 </code> </code>
  
-The Nucleo STM32F411+Nucleo STM32F411 (STM32F411RET6)
 <code> <code>
  INFO src/stlink-common.c: Loading device parameters....  INFO src/stlink-common.c: Loading device parameters....
Line 59: Line 71:
 </code> </code>
  
-The STM32F4 Discovery (STM32F407VGT6)+STM32F4 Discovery (STM32F407VGT6)
 <code> <code>
  INFO src/stlink-common.c: Loading device parameters....  INFO src/stlink-common.c: Loading device parameters....
Line 66: Line 78:
 </code> </code>
  
-The STM32 Value Line Discovery (STM32F100RBT6B)+STM32 Value Line Discovery (STM32F100RBT6B)
 <code> <code>
  INFO src/stlink-common.c: Loading device parameters....  INFO src/stlink-common.c: Loading device parameters....
Line 73: Line 85:
 </code> </code>
  
-The STM32F030 DEMO BOARD V1.0+STM32F030 DEMO BOARD V1.0 (STM32F030F4P6)
 <code> <code>
  INFO src/stlink-common.c: Loading device parameters....  INFO src/stlink-common.c: Loading device parameters....