You are here: start » tools » stk500v2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools:stk500v2 [2021/09/12 05:48] – [Install] darrontools:stk500v2 [2024/07/10 12:31] (current) – external edit 127.0.0.1
Line 5: Line 5:
 ===Download=== ===Download===
  
-[[https://wiki.kewl.org/downloads/BL/stk500boot_v2_mega2560.hex|stk500boot_v2_mega2560.hex]]+{{downloads:BL:stk500boot_v2_mega2560.hex|stk500boot_v2_mega2560.hex}}
  
 === Install === === Install ===
Line 15: Line 15:
 <code> <code>
 avrdude -V -B 5 -P `pavr2cmd --prog-port` -c avrisp2 -p ATMEGA2560 -e -u -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U lfuse:w:0xFF:m avrdude -V -B 5 -P `pavr2cmd --prog-port` -c avrisp2 -p ATMEGA2560 -e -u -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U lfuse:w:0xFF:m
-avrdude    -B 5 -P `pavr2cmd --prog-port` -c avrisp2 -p ATMEGA2560 -D -U flash:w:stk500boot_v2_mega2560.hex+avrdude    -B 5 -P `pavr2cmd --prog-port` -c avrisp2 -p ATMEGA2560 -D -U flash:w:stk500boot_v2_mega2560.hex:i
 avrdude -V -B 5 -P `pavr2cmd --prog-port` -c avrisp2 -p ATMEGA2560 -u -U lock:w:0x0F:m avrdude -V -B 5 -P `pavr2cmd --prog-port` -c avrisp2 -p ATMEGA2560 -u -U lock:w:0x0F:m
 </code> </code>
 +
 +__USBasp__
 +
 +<code>
 +avrdude -V -B 5 -c usbasp -p atmega2560 -e -u -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U lfuse:w:0xFF:m
 +avrdude    -B 5 -c usbasp -p atmega2560 -D -U flash:w:stk500boot_v2_mega2560.hex:i
 +avrdude -V -B 5 -c usbasp -p atmega2560 -u -U lock:w:0x0F:m
 +</code>
 +
 +__USBTiny__
 +
 +This programmer does not support devices with greater than 64KB flash (Atmega1281/1280/2561/2560).