Differences

This shows you the differences between two versions of the page.

--- tools:segger [2023/08/17 11:52] – [Install] darron
+++ tools:segger [2024/08/12 12:55] (current) – [Install] darron
@@ Line 23: / Line 23: @@
 run J-Link on arm6l it will crash with a segmentation fault.
-Visit the [[https://www.segger.com/downloads/jlink/JLink_Linux_arm.tgz|J-Link for ARM]] page or [[https://www.segger.com/downloads/jlink/JLink_Linux_V792a_arm64.tgz|J-Link for ARM64]] page
+Download the armv7l or aarch64 compatible binaries to store in /opt.
-and agree to their terms, after which you may download the armv7l or aarch64 compatible binaries to store in /opt.
+[[https://www.segger.com/downloads/jlink/JLink_Linux_arm64.tgz|Linux ARM 64-bit]]
+[[https://www.segger.com/downloads/jlink/JLink_Linux_arm.tgz|Linux ARM 32-bit]]
 <code>
@@ Line 38: / Line 41: @@
 The udev rules didn't work for me so I use my [[http://hg.kewl.org/pub/rules.d/raw-file/1ab9e879dc61/10-local.rules|own]].
+NB do not add /opt/JLink to ldconfig path since on ARM64 a 32-bit library will be
+included which breaks JLink.
 ===Windows===
@@ Line 60: / Line 66: @@
 This board has had ST-Link replaced by JLink on-board.
+Upgrading to JLink requires an older ST-LINK firmware to be
+installed as newer versions fail to be detected. A working
+firmware for upgrade is found in "en.stsw-link007_V2-32-22.zip"
 <code>