You are here: start » tools » rtlsdr

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools:rtlsdr [2024/08/22 15:54] – [Install] darrontools:rtlsdr [2024/08/22 23:36] (current) – [Resources] darron
Line 1: Line 1:
 +====RTL-SDR====
  
 ===Install=== ===Install===
Line 19: Line 20:
 <code> <code>
 patch -p 1 < blinick-wip_rtltcp_ringbuf.diff patch -p 1 < blinick-wip_rtltcp_ringbuf.diff
 +patching file src/rtl_tcp.c
 +
 </code> </code>
 +
 +==Make==
 +
 +<code>
 +cmake -DINSTALL_UDEV_RULES=ON -DDETACH_KERNEL_DRIVER=ON .
 +make
 +sudo make install
 +sudo ldconfig
 +</code>
 +
 +===RTL_TCP====
 +
 +<code>
 +/usr/local/bin/rtl_tcp -a 0.0.0.0 -s 2048000
 +</code>
 +
 +==R820T2==
 +
 +Range approx. 24 - 1760 MHz but with reduced performance over 1500 MHz.
 +<code>
 +Found 1 device(s):
 +  0:  Realtek, RTL2838UHIDIR, SN: 00000001
 +
 +Using device 0: Generic RTL2832U OEM
 +Detached kernel driver
 +Found Rafael Micro R820T tuner
 +[R82XX] PLL not locked!
 +Tuned to 100000000 Hz.
 +listening...
 +Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source
 +to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).
 +</code>
 +
 +==E4000==
 +
 +Range approx. 54 - 2147 MHz, but no coverage between 1100 - 1250 MHz.
 +
 +<code>
 +Found 1 device(s):
 +  0:  Compro, VMU6xx, SN: 0020
 +
 +Using device 0: Compro Videomate U680F
 +Found Elonics E4000 tuner
 +Tuned to 100000000 Hz.
 +listening...
 +Use the device argument 'rtl_tcp=0.0.0.0:1234' in OsmoSDR (gr-osmosdr) source
 +to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).
 +</code>
 +
 +You can now connect to the Linux host using AIRSPY SDR# Studio.
 +===Resources===
 +
 +[[https://github.com/osmocom/rtl-sdr/pull/6|Patch thread]]
 +
 +{{downloads:hb9ajg.pdf|Some Measurements on E4000 and R820 Tuners}}