Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
tools:retrobsd [2015/03/09 07:22] – [Install] darrontools:retrobsd [2015/03/22 21:55] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ==== RetroBSD ==== ==== RetroBSD ====
 <wrap right> <wrap right>
-{{:tools:2.11bsd.jpg?100}}+{{:tools:2.11bsd.jpg?200}} 
 +\\ \\ 
 +{{:tools:2.11bsd-2.jpg?200}}
 </wrap> </wrap>
  
Line 59: Line 61:
  
 === Build === === Build ===
-Building will create the unix boot image and the SDcard image for the system.+Building will create the unix boot image and the SD card image for the system.
 <code> <code>
 make cleanall make cleanall
Line 72: Line 74:
 </code> </code>
  
-Next, Hold the PROG button and toggle RESET on the SDXL board to enter the boot laoder. We will use [[:projects:pickle|Pickle]] pload to install the kernel.+Next, Hold the PROG button and toggle RESET on the SDXL board to enter the boot laoder. We will use [[:tools:pic32prog|PIC32Prog]] to install the kernel. 
 <code> <code>
-pload program /dev/ttyACM0 sys/pic32/sdxl/unix.hex 24 +pic32prog -d /dev/ttyACM0 ./sys/pic32/sdxl/unix.hex 
-Total: 157004 +Programmer for Microchip PIC32 microcontrollers, Version 1.119M 
-Time: 0:08.45s+    Copyright: (C) 2011-2014 Serge Vakulenko 
 +      Adapter: STK500v2 Bootloader 
 + Program area: 1d000000-1d07ffff 
 +    Processor: Bootloader 
 + Flash memory: 512 kbytes 
 +  Boot memory: 12 kbytes 
 +         Data: 157004 bytes 
 +        Erasedone 
 +Program flash: ####################################### done 
 + Verify flash: ####################################### done 
 +Rate: 40790 bytes per second 
 +</code> 
 + 
 +=== Login === 
 + 
 +A virtual com port should have been detected after installation. 
 + 
 +The kernel will log something similar to the following. 
 +<code> 
 +usb 1-1.4: new full-speed USB device number 12 using dwc_otg 
 +usb 1-1.4: New USB device found, idVendor=04d8, idProduct=000a 
 +usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 
 +usb 1-1.4Product: RetroBSD Console 
 +usb 1-1.4: Manufacturer: Microchip Technology Inc. 
 +cdc_acm 1-1.4:1.0: This device cannot do calls on its own. It is not a modem. 
 +cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device 
 +</code> 
 + 
 +Connecting with a terminal emulator to the virtual com port and pressing enter will boot the system. 
 +<code> 
 +screen /dev/ttyACM0 115200 
 +</code> 
 + 
 +Enter the username root with an empty password to login. 
 +<code> 
 + 
 +2.11 BSD Unix for PIC32, revision G205 build 2: 
 +     Compiled 2015-03-09 by root@beethoven: 
 +     /embedded/retrobsd/sys/pic32/sdxl 
 +cpu: 795F512H 80 MHz, bus 80 MHz 
 +oscillator: external, PLL div 1:2 mult x20 
 +console: ttyUSB0 (6,0) 
 +sd0: port SPI2, select pin G9 
 +sd0: type SDHC, size 3932160 kbytes, speed 13 Mbit/sec 
 +phys mem  = 128 kbytes 
 +user mem  = 96 kbytes 
 +root dev  = rd0a (0,1) 
 +root size = 102400 kbytes 
 +swap dev  = rd0b (0,2) 
 +swap size = 2048 kbytes 
 +/dev/rd0a: 659 files, 10738 used, 91261 free 
 +Starting daemons: update /var/cron: No such file or directory 
 +/var/cron: created 
 +tabs: No such file or directory 
 +tabs: created 
 +cron  
 + 
 + 
 +2.11 BSD UNIX (pic32) (console) 
 + 
 +login: root 
 +Password: 
 +Welcome to RetroBSD! 
 +erase, kill ^U, intr ^C 
 +# ps axl 
 +  F S   UID   PID  PPID CPU PRI NICE  ADDR  SZ WCHAN    TTY  TIME COMMAND 
 +  3 S              54     0 0x6800   3 runout   ?    0:03 swapper 
 +200 S                30     0x69  45 proc     ?    0:00 init -  
 +200 S        11      23  40      0xd   6 u        ?    0:00 update  
 +200 S        13      42  26      0x9  73 selwait  ?    0:00 cron  
 +200 S        14        30     0x19  56 proc     USB  0:00 -sh  
 +  1 R        17    14  24  51   0 0x7400  52          USB  0:00 ps axl  
 +#
 </code> </code>