You are here: start » tools » pic32prog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools:pic32prog [2015/03/07 12:52] – [Usage] darrontools:pic32prog [2016/02/17 04:45] (current) – [Install] darron
Line 1: Line 1:
 ==== PIC32Prog ==== ==== PIC32Prog ====
 +
 +<wrap right>
 +{{:tools:pic32prog-57600.jpg?200}}
 +</wrap>
  
 PIC32Prog programs PIC32 controllers via a number of back-ends on a variety PIC32Prog programs PIC32 controllers via a number of back-ends on a variety
Line 5: Line 9:
  
 The version of PIC32Prog available from GitHub is compatible The version of PIC32Prog available from GitHub is compatible
-with [[:projects:nanu-nanu|Nanu Nanu]] at 115200 baud. Soon it will support user-defined bit rates to allow 57600 baud operation.+with [[:projects:nanu-nanu|Nanu Nanu]] at 115200 and 57600 baud. 
 === Install === === Install ===
  
 <code> <code>
-apt-get install libusb-1.0-0-dev                                                        +apt-get install libusb-dev libusb-1.0-0-dev libudev-dev
-apt-get install libudev-dev  +
 git clone https://github.com/sergev/pic32prog.git git clone https://github.com/sergev/pic32prog.git
-cd pic32prog.git +cd pic32prog
-sed -i 's/ludev/ludev -lrt/' makefile+
 make make
 make install make install
Line 19: Line 22:
  
 === Usage === === Usage ===
-In this example we program the [[:projects:ape65|Ape65]] MX150 firmware with a [[:boards:nano|Nano 3.0]] clone running [[:projects:nanu-nanu|Nanu Nanu]].+In this example we program the [[:projects:ape65|Ape65]] MX150 firmware with a [[:boards:nano|Nano 3.0]] clone running [[:projects:nanu-nanu|Nanu Nanu]] (see photo).
  
 <code> <code>