You are here: start » tools » openocd

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools:openocd [2022/12/15 22:39] – [Install] darrontools:openocd [2024/08/24 11:16] (current) – darron
Line 1: Line 1:
 ==== OpenOCD ==== ==== OpenOCD ====
 <wrap right> <wrap right>
-{{:tools:openocd.jpg?200|OpenOCD with a J-Link clone}}+{{:tools:openocd.jpg?100|OpenOCD with a J-Link clone}}
 \\ \\ \\ \\
-{{:interfaces:usbocdh.jpg?200|Olimex USB OCD H for OpenOCD}}+{{:interfaces:usbocdh.jpg?100|Olimex USB OCD H for OpenOCD}}
 </wrap> </wrap>
  
Line 18: Line 18:
  
 <code> <code>
-sudo apt install build-essential automake libtool libhidapi-dev libcapstone-dev +apt install build-essential git automake libtool libhidapi-dev libcapstone-dev libusb-1.0-0-dev libjaylink-dev pkg-config
 </code> </code>
  
Line 25: Line 24:
  
 <code> <code>
 +mkdir -p /opt/src
 +cd /opt/src
 git clone https://git.code.sf.net/p/openocd/code openocd git clone https://git.code.sf.net/p/openocd/code openocd
 cd openocd cd openocd
 ./bootstrap ./bootstrap
 ./configure --enable-ftdi --enable-sysfsgpio --enable-bcm2835gpio --enable-picoprobe --enable-jlink --enable-ft232r --enable-cmsis-dap --enable-cmsis-dap-v2 --with-capstone ./configure --enable-ftdi --enable-sysfsgpio --enable-bcm2835gpio --enable-picoprobe --enable-jlink --enable-ft232r --enable-cmsis-dap --enable-cmsis-dap-v2 --with-capstone
-make +make -j 4 
-sudo make install+make install 
 +</code> 
 + 
 +NB ST provide a modified version for their processors 
 + 
 +<code> 
 +git clone https://github.com/STMicroelectronics/OpenOCD openocd.stm32
 </code> </code>
  
 ==Windows== ==Windows==
  
-[[https://github.com/openocd-org/openocd/releases/download/v0.12.0-rc2/openocd-v0.12.0-rc2-i686-w64-mingw32.tar.gz|Download]]+Release overview is [[https://github.com/openocd-org/openocd/releases|here]] or [[https://github.com/openocd-org/openocd/releases/download/v0.12.0-rc2/openocd-v0.12.0-rc2-i686-w64-mingw32.tar.gz|download]].