You are here: start » tools » mqtt_as

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools:mqtt_as [2020/08/18 08:34] – [boot.py] darrontools:mqtt_as [2020/08/18 23:41] (current) – external edit 127.0.0.1
Line 84: Line 84:
 ===config.py=== ===config.py===
  
-mqtt_as configuration as found in distribution directory with mosquitto server and wifi+mqtt_as configuration as found in distribution directory with mosquitto MQTT broker and wifi
 changes. changes.
  
-Configure MQTT server, ssid and password.+Configure MQTT broker, ssid and password.
  
 <code> <code>
Line 129: Line 129:
 ===mqtt_as.py=== ===mqtt_as.py===
  
-mqtt_as excecutable.+mqtt_as excecutable. This is the main logic which maintains a Wifi connection and publishes and subscribes to topics.
  
 <code> <code>
Line 215: Line 215:
 ==script== ==script==
  
-Subscribe the result message from the ESP32 module and display the running status.+Subscribe to the topic named 'result' published by the ESP32 module and display it.
  
 <code> <code>
 #! /bin/bash #! /bin/bash
-while : +mosquitto_sub -h 192.168.0.13 -t result
-do +
-    mosquitto_sub -h 192.168.0.13 -t result +
-    sleep 5 +
-done+
 </code> </code>
  
 ==Shell output== ==Shell output==
  
-Running status for result.+Running status for the result topic.
  
 <code> <code>
Line 239: Line 235:
 ==script== ==script==
  
-publish two messages to the foo_topic which the ESP32 devices is sunbscribed to,+Publish two messages to the topic named 'foo_topic' which the ESP32 device is subscribed to,
  
 <code> <code>
Line 255: Line 251:
 ==ESP32 output== ==ESP32 output==
  
-Running status on the ESP32 with incoming subscription messages.+Show running status on the ESP32 and incoming subscription topics.
  
 <code> <code>