tools:lorawan-server - wiki.kewl.org

You are here: start » tools » lorawan-server

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====lorawan-server====

<wrap right>
{{tools:lorawan-server.jpg?200}}
</wrap>

This server is compatible with the obsolete [[:boards:lrwan2|P-NUCLEO-LRWAN2]] LoRaWAN kit
which utilises the [[:interfaces:risinghf|RisingHF LRWAN GS HF1]] LoRaWAN gateway daughterboard.

A [[https://community.st.com/t5/stm32-mcus/how-to-create-a-lorawan-server-on-local-pc-1-2/ta-p/49286|guide]] on the ST forum explains how to setup and configure this on Windows, however, it's preferable in my opinion, to setup up the server on Debian Buster 10.13 in a [[:tools:KVM|KVM]], and then follow the web configuration in the guide.

NB. Running the server on Debian Bookworm was attempted but failed. No other versions of Debian were tested other than Bookworm and Buster, and Buster was documented to work by the author.

===O/S===

Create the [[:tools:kvm|KVM]] using `debian-10.13.0-amd64-DVD-1.iso'.

In my case the VM is named vm5 and has the IP address 192.168.0.115.

==Run==

Follow the [[https://github.com/gotthardp/lorawan-server/blob/master/doc/Installation.md|guide]] to install and run the server.

==Configure==

GOTO http://admin:admin@192.168.0.115:8080/ and follow the [[https://community.st.com/t5/stm32-mcus/how-to-create-a-lorawan-server-on-local-pc-1-2/ta-p/49286|guide]] to configure the server.

===Resources===

[[https://community.st.com/t5/stm32-mcus/how-to-create-a-lorawan-server-on-local-pc-1-2/ta-p/49286|How to create a LoRaWAN server on local PC]]

[[https://gotthardp.github.io/lorawan-server/|lorawan-server homepage]]

[[https://www.st.com/en/evaluation-tools/p-nucleo-lrwan2.html|P-NUCLEO-LRWAN2]]

start

tools

advertisement

Toolbox