Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| tools:gccarm [2020/08/08 01:48] – [Resources] darron | tools:gccarm [2024/08/26 01:07] (current) – [Linux] darron | ||
|---|---|---|---|
| Line 6: | Line 6: | ||
| === Linux === | === Linux === | ||
| - | Prepare installation. | + | Newer distributions contain this tool |
| - | < | + | |
| - | mkdir -p / | + | |
| - | cd / | + | |
| - | </ | + | |
| - | Install latest version. | ||
| < | < | ||
| - | wget https:// | + | sudo apt-get install |
| - | tar xjvf gcc-arm-none-eabi-5_2-2015q4-20151219-linux.tar.bz2 | + | |
| </ | </ | ||
| - | === Raspberry Pi === | + | Otherwise download the last known release from [[https:// |
| + | |||
| + | /* | ||
| + | === Issues=== | ||
| + | |||
| + | ==Rpi== | ||
| + | |||
| + | Older toolchains (Eg. 7-2018-q2-6) don't build binaries for some modern devices, Eg. STM32U5 so needs to be upgraded manually. | ||
| < | < | ||
| + | sudo apt remove gcc-arm-none-eabi | ||
| wget https:// | wget https:// | ||
| tar -xvf gcc-arm-none-eabi-9-2020-q1-update-armv7l-linux.tar.bz2 | tar -xvf gcc-arm-none-eabi-9-2020-q1-update-armv7l-linux.tar.bz2 | ||
| - | sudo mkdir /opt | + | sudo cp -r gcc-arm-none-eabi-9-2020-q1-update/ |
| - | sudo mv gcc-arm-none-eabi-9-2020-q1-update | + | sudo rm -r gcc-arm-none-eabi-9-2020-q1-update |
| </ | </ | ||
| + | */ | ||
| === Resources === | === Resources === | ||
| - | [[https:// | ||
| - | [[https://github.com/vanbwodonk/gcc-arm-embedded-build-armhf|gcc-arm for RPi]] | + | [[https://developer.arm.com/tools-and-software/open-source-software/ |
| + | [[https:// | ||
