You are here: start » tools » dfu-util

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
tools:dfu-util [2022/10/31 14:22] – [Probe] darrontools:dfu-util [2022/10/31 14:27] (current) – [Probe] darron
Line 82: Line 82:
  
 ==Maple Mini== ==Maple Mini==
 +
 +__Probe__
  
 <code> <code>
Line 95: Line 97:
 Found DFU: [1eaf:0003] ver=0201, devnum=54, cfg=1, intf=0, path="1-1.1.3", alt=0, name="DFU Program RAM 0x20000C00", serial="LLM 003" Found DFU: [1eaf:0003] ver=0201, devnum=54, cfg=1, intf=0, path="1-1.1.3", alt=0, name="DFU Program RAM 0x20000C00", serial="LLM 003"
 Found DFU: [1eaf:0003] ver=0201, devnum=54, cfg=1, intf=0, path="1-1.1.3", alt=1, name="DFU Program FLASH 0x08005000", serial="LLM 003" Found DFU: [1eaf:0003] ver=0201, devnum=54, cfg=1, intf=0, path="1-1.1.3", alt=1, name="DFU Program FLASH 0x08005000", serial="LLM 003"
 +</code>
 +
 +__Program__
 +
 +<code>
 +sudo make -f Makefile.maple_mini dfu-util
 +dfu-util -a 1 -D maple_mini.bin
 +dfu-util 0.11-dev
 +
 +Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
 +Copyright 2010-2021 Tormod Volden and Stefan Schmidt
 +This program is Free Software and has ABSOLUTELY NO WARRANTY
 +Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
 +
 +dfu-util: Warning: Invalid DFU suffix signature
 +dfu-util: A valid DFU suffix will be required in a future dfu-util release
 +Opening DFU capable USB device...
 +Device ID 1eaf:0003
 +Device DFU version 0110
 +Claiming USB DFU Interface...
 +Setting Alternate Interface #1 ...
 +Determining device status...
 +DFU state(2) = dfuIDLE, status(0) = No error condition is present
 +DFU mode device DFU version 0110
 +Device returned transfer size 1024
 +Copying data from PC to DFU device
 +Download        [=========================] 100%        17032 bytes
 +Download done.
 +DFU state(8) = dfuMANIFEST-WAIT-RESET, status(0) = No error condition is present
 +Resetting USB to switch back to runtime mode
 +Done!
 </code> </code>