Differences

This shows you the differences between two versions of the page.

--- tools:devuan [2019/08/24 16:14] – darron
+++ tools:devuan [2019/08/24 17:31] (current) – [Install Broadcom WiFi driver (if present)] darron
@@ Line 65: / Line 65: @@
 Mount the system partition and set up networking. This
 will allow us to login after the Pi boots and finalise the
-set up. Use eth0 or supported WiFi adapter, Eg. BELKIN
+set up.
-FD?????.
 <code>
@@ Line 73: / Line 72: @@
 vi /mnt/etc/resolv.conf
 </code>
+If you need to use WiFI, Eg. BELKIN FD00000, place the
+firmware in /lib/firmware (rt73.bin).
 Un mount the system partition.
@@ Line 82: / Line 84: @@
 === Install Broadcom WiFi driver (if present)===
-To-do
-=== Disable undesired services ===
 <code>
-update-rc.d dhcpcd disable
+apt-get install firmware-brcm80211
-update-rc.d motd disable
+wget -q https://raw.githubusercontent.com/RPi-Distro/firmware-nonfree/master/brcm/brcmfmac43430-sdio.txt -O /lib/firmware/brcm/brcmfmac43430-sdio.txt
-update-rc.d triggerhappy disable
-update-rc.d cron disable
-update-rc.d dbus disable
-update-rc.d dphys-swapfile disable
-update-rc.d ntp disable
-update-rc.d avahi-daemon disable
-update-rc.d bluetooth disable
-update-rc.d plymouth disable
-update-rc.d paxctld disable
 </code>
+=== Disable undesired services ===
 Edit /etc/inittab and disable unnecessary gettys and reboot.
-=== Set up swap ===
-Because we disabled the useless swap generator, do it by hand.
-<code>
-swapoff /var/swap
-dd if=/dev/zero of=/var/swap bs=4M count=512
-mkswap /var/swap
-echo "/var/swap none swap sw 0 0" >> /etc/fstab
-reboot
-</code>
 === Finish off ===

Differences

start

tools

advertisement

Toolbox