Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| tools:core [2022/09/24 10:22] – [Install] darron | tools:core [2022/09/24 10:30] (current) – [Ubuntu Core] darron | ||
|---|---|---|---|
| Line 8: | Line 8: | ||
| This guide is for the UBUNTU core 22 on the RPi version 2. | This guide is for the UBUNTU core 22 on the RPi version 2. | ||
| - | The initial problem with this is that it requires a monitor and US keyboard to setup. | + | The initial problem with this is that it requires a monitor and US keyboard to setup. |
| - | WiFI is required, then it must be supported and the only supported USB wireless adapter at | + | |
| + | If WiFI is required, then it must be supported and the only supported USB wireless adapter at | ||
| hand was a Broadcom type BCM43143/2. Neither a RALINK or Atheros USB | hand was a Broadcom type BCM43143/2. Neither a RALINK or Atheros USB | ||
| adapter were supported. | adapter were supported. | ||
| + | |||
| + | The integrated WiFi on the RPi3 and RPi4 should also be supported but I have not tested this. | ||
| It is necessary to setup the system using supported hardware at the outset and UBUNTU core can be considered to be a SNAP appliance. | It is necessary to setup the system using supported hardware at the outset and UBUNTU core can be considered to be a SNAP appliance. | ||
| Line 47: | Line 50: | ||
| </ | </ | ||
| - | After enabling DHPCv4 on the network interface and it will ask for an email address (remember that the @ symbol is SHIFT-2). | + | After enabling DHPCv4 on the network interface and it will ask for an email address (remember that the @ symbol is SHIFT-2 |
| The e-mail address must be registered on UBUNTO ONE at https:// | The e-mail address must be registered on UBUNTO ONE at https:// | ||
