Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
tools:chirpstackos [2024/08/15 02:08] – [Chirpstack] darrontools:chirpstackos [2024/08/15 13:35] (current) – [Network] darron
Line 1: Line 1:
-====Chirpstack Gateway OS====+====ChirpStack Gateway OS====
  
 <wrap right> <wrap right>
-{{:tools:cstack1.jpg?100}} {{:tools:cstack2.jpg?100}}+{{:tools:cstack1.jpg?100}}
 \\ \\ \\ \\
-{{:tools:cstack3.jpg?200}}+{{:tools:cstack2.jpg?100}} 
 +\\ \\ 
 +{{:tools:cstack3.jpg?100}}
 </wrap> </wrap>
  
Line 38: Line 40:
 you can use that in advance to setup a fixed IP address. you can use that in advance to setup a fixed IP address.
  
-I would also disable the dnsmasq DHCP authoritative setting.+Ensure that ignore interface is set for DHCP on the LAN. There should be no 
 +harm disabling dnsmasq authoritative DHCP for the LAN as well.
  
-===Chirpstack===+===ChirpStack===
  
-Under chirpstack enable concentratord, in my case I enabled SX1302/SX1303+Under ChirpStack enable concentratord, in my case I enabled SX1302/SX1303
 and then selected the Waveshare device on the SX1302/SX1303 tab. and then selected the Waveshare device on the SX1302/SX1303 tab.
  
-Now enable MQTT forwarding and the gateway is up and running and the chirpstack application +Now enable MQTT forwarding and the gateway is up and running and the ChirpStack server 
-can now be configured.+application can now be configured.