Differences

This shows you the differences between two versions of the page.

--- tools:chirpstackos [2024/08/15 01:40] – [Network] darron
+++ tools:chirpstackos [2024/08/15 13:35] (current) – [Network] darron
@@ Line 1: / Line 1: @@
-====Chirpstack Gateway OS====
+====ChirpStack Gateway OS====
 <wrap right>
-{{:tools:cstack1.jpg?100}} {{:tools:cstack2.jpg?100}}
+{{:tools:cstack1.jpg?100}}
 \\ \\
-{{:tools:cstack3.jpg?200}}
+{{:tools:cstack2.jpg?100}}
+\\ \\
+{{:tools:cstack3.jpg?100}}
 </wrap>
@@ Line 38: / Line 40: @@
 you can use that in advance to setup a fixed IP address.
-I would also disable the dnsmasq DHCP authoritative setting.
+Ensure that ignore interface is set for DHCP on the LAN. There should be no
+harm disabling dnsmasq authoritative DHCP for the LAN as well.
-===Chirpstack===
+===ChirpStack===
-Under chirpstack enable concentratord, in my case the settings are enable SX1302/SX1303
+Under ChirpStack enable concentratord, in my case I enabled SX1302/SX1303
-and then select the Waveshare device on the SX1302/SX1303 tab.
+and then selected the Waveshare device on the SX1302/SX1303 tab.
-Now enable MQTT forwarding and the gateway is up and running and the chirpstack application
+Now enable MQTT forwarding and the gateway is up and running and the ChirpStack server
-can now be configured.
+application can now be configured.