This is an old revision of the document!


XINO Basic for PIC

xino2.jpg

The XINO Basic for PIC/PICAXE is compatible with any 18-pin device which has a UART with RX on pin 8 and TX on pin 11 (Eg. 16F88 but not 16F627) with an internal oscillator.
The on-board XTAL is not connected to the 18-pin socket.

All 28-pin devices should be compatible which have a UART on pins 17 and 18.

(Ciseco has discontinued this product).

PIC16F88 (INSTEAD OF PICAXE 18M2 / PIC16F1847)

RA2 AN2 VREF- CVREF 1----18 RA1 AN1
RA3 AN3 VREF+ C1OUT 2    17 RA0 AN0
RA4 AN4 T0CKI C2OUT 3    16 RA7 OSC1 CLKI
RA5 !MCLR VPP       4    15 RA6 OSC2 CLKO
VSS/GND             5    14 VDD/VCC
RB0 INT CCP1        6    13 RB7 AN6 PGD T1OSI
RB1 SDI SDA         7    12 RB6 AN5 PGC T1OSO T1CKI
RB2 SDO RX DT       8    11 RB5 !SS TX CK
RB3 PGM CCP1        9----10 RB4 SCK SCL

I/O

HEADER
------
 P0     NC                              15      NC
 P1     NC                              14       5 VSS GND
RST     NC                              13      10 RB4 SCK SCL
3V3     14 VDD/VCC JUMPER=3V3           12       7 RB1 SDI SDA
 5V     14 VDD/VCC JUMPER=5V            11      15 RA6 OSC2 CLKO
GND      5 VSS/GND                      10       2 RA3 AN3 VREF+ C1OUT
GND      5 VSS/GND                      09      NC
VIN     NC                              08      16 RA7 OSC1 CLKI

A0       1 RA2 AN2 VREF- CVREF          07      NC
A1      13 RB7 AN6 PGD T1OSI            06      NC
A2      17 RA0 AN0                      05      NC
A3      18 RA1 AN1                      04       9 RB3 PGM CCP1
A4       3 RA4 AN4 T0CKI C2OUT          03      12 RB6 AN5 PGC T1OSO T1CKI
A5       4 RA5 !MCLR VPP                02       6 RB0 INT CCP1
                                        01      11 RB5 !SS TX CK
SERIAL                                  00       8 RB2 SDO RX DT
------
RST     NC                      JACK
GND      5 VSS/GND              ----
MCUPWR  14 VDD/VCC              SLEEVE  2 RA3
TX      11 RB5 !SS TX CK        RING    3 RA4
RX       8 RB2 SDO RX DT        TIP     GROUND

ICSP
----
1:VPP 12V        A5 TIE WITH 9V1 ZENER FOR 9V HVP
2:VDD 5V         5V
3:VSS/GND       GND
4:PGD            A1
5:PGC            03
  PGM            04 TIE WITH 100K TO GND FOR HVP

PIC18F2320 (INSTEAD OF PICAXE 28X2 / PIC18F25K22)

!MCLR VPP               1----28 RB7 KBI3 PGD
RA0 AN0                 2    27 RB6 KBI2 PGC
RA1 AN1                 3    26 RB5 KBI1 PGM
RA2 AN2 VREF- CVREF     4    25 RB4 KBI0 AN11
RA3 AN3 VREF+           5    24 RB3 AN9  CCP2
RA4 T0CKI C1OUT         6    23 RB2 AN8  INT2
RA5 AN4 !SS LVDIN C2OUT 7    22 RB1 AN10 INT1
VSS GND                 8    21 RB0 AN12 INT0
OSC1 CLKI RA7           9    20 VDD VCC
OSC2 CLKO RA6           10   19 VSS GND
RC0 T1OSO T1CKI         11   18 RC7 RX DT
RC1 T1OSI CCP2          12   17 RC6 TX CK
RC2 CCP1 P1A            13   16 RC5 SDO
RC3 SCK SCL             14---15 RC4 SDI SDA

I/O

HEADER
------
 P0     12 RC1 T1OSI CCP2               15      NC
 P1     13 RC2 CCP1 P1A                 14       8/19 VSS GND
RST      1 !MCLR VPP                    13      14 RC3 SCK SCL
3V3     20 VDD/VCC JUMPER=3V3           12      15 RC4 SDI SDA
 5V     20 VDD/VCC JUMPER=5V            11      16 RC5 SDO
GND      8/19 VSS/GND                   10       7 RA5 AN4 !SS LVDIN C2OUT
GND      8/19 VSS/GND                   09      28 RB7 KBI3 PGD
VIN     NC                              08      27 RB6 KBI2 PGC

A0       2 RA0 AN0                      07      26 RB5 KBI1 PGM
A1       3 RA1 AN1                      06      25 RB4 KBI0 AN11
A2       4 RA2 AN2 VREF- CVREF          05      24 RB3 AN9  CCP2
A3       5 RA3 AN3 VREF+                04      23 RB2 AN8  INT2
A4       6 RA4 T0CKI C1OUT              03      22 RB1 AN10 INT1
A5      11 RC0 T1OSO T1CKI              02      21 RB0 AN12 INT0
                                        01      17 RC6 TX CK
SERIAL                                  00      18 RC7 RX DT
------
RST      1 !MCLR VPP    JACK            XTAL
GND      8 VSS/GND      ----            ----
MCUPWR  20 VDD/VCC      SLEEVE  7 RA5    9 OSC1 CLKI RA7
TX      17 RC6 TX CK    RING    6 RA4   10 OSC2 CLKO RA6
RX      18 RC7 RX DT    TIP     GROUND

ICSP
----
1:VPP 12V       RST TIE WITH 9V1 ZENER FOR 9V HVP
2:VDD 5V         5V
3:VSS/GND       GND
4:PGD            09
5:PGC            08
  PGM            07 TIE WITH 100K TO GND FOR HVP
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies