This board uses a dual core STM32WL55JC MCU which contains both a Cortex-M4 and Cortex-M0+ CPU.

Two demo boards exist, the JC1 and JC2. The former is for high band RF and the latter low band RF.

OSC32 X2 NX2012SA 32.768KHz PC14/PC15 
OSC   X3 NX2016SA 32MHz

PB9  LED2 GREEN
PB11 LED3 RED
PB15 LED1 BLUE

PA2 USART2_TX VCP_TX LPUART1_TX
PA3 USART2_TX VCP_TX LPUART1_RX
PB6 USART1_TX ARDUINO_TX
PB7 USART1_RX ARDUINO_RX

PA0 BUTTON1 PC13
PA1 BUTTON2
PC6 BUTTON3

PC3 FE_CTRL3
PC4 FE_CTRL1
PC5 FE_CTRL2

PB0 VDD_TCXO

Software available for this board depends on a proprietary IDE and doesn't support GNU Make or cmake out of the box.

There are two version of the support package. One contains proprietary source code and is dated, the other only free to use source code and is maintained and kept up to date.

This version contains proprietary source files and requires an ST login to download.

Extract

unzip en.stm32cubewl-v1-3-0.zip

Source code on github is maintained but lacks proprietary code. See the README section for a list of features removed.

Checkout

git clone --recursive https://github.com/STMicroelectronics/STM32CubeWL.git

Update

git pull
git submodule update --init --recursive

README

These are the features removed from the non proprietary version maintained at github

cat Projects/README.md
# Some projects are unavailable in this repository

In this repository, some middleware libraries **along with** the projects (demos, applications, and examples) using them, are **not available**. Please refer to the [README.md](../README.md#some-middleware-libraries-and-projects-are-unavailable-in-this-repository) file at the root of this repository for further details.

## List of unavailable projects

* `./Projects/B-WL5M-SUBG1/Applications/LoRaWAN/LoRaWAN_End_Node_DualCore`
* `./Projects/B-WL5M-SUBG1/Applications/LoRaWAN_FUOTA_DualCore_ExtFlash`
* `./Projects/NUCLEO-WL55JC/Applications/BFU_1_Slot`
* `./Projects/NUCLEO-WL55JC/Applications/BFU_2_Slots`
* `./Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_AT_Slave_DualCore`
* `./Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_DualCore`
* `./Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_DualCoreFreeRTOS`
* `./Projects/NUCLEO-WL55JC/Applications/LoRaWAN_FUOTA`
* `./Projects/NUCLEO-WL55JC/Applications/LoRaWAN_FUOTA_DualCore`
* `./Projects/NUCLEO-WL55JC/Applications/LoRaWAN_SBSFU_1_Slot_DualCore`
* `./Projects/NUCLEO-WL55JC/Applications/SBSFU_1_Slot_DualCore`
* `./Projects/NUCLEO-WL55JC/Applications/SBSFU_2_Slots_DualCore`
* `./Projects/NUCLEO-WL55JC1/Applications/Sigfox_SBSFU_1_Slot_DualCore`

Checkout the software package from github into the STM32CubeMX project directory as STM32CubeWL

Create the LoRAWAN end node demo.

• Open STM32CubeMX
• Go to Load project
• Navigate to STM32CubeWL/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node
• Open LoRaWAN_End_Node.ioc
• Go to Project Manager
• Change toolchain to Makefile
• Change MCU and Firmware Location to the checkout directory STM32CubeWL
• Setup LoRaWAN commissioning (LoRaWAN/App/se-identity.h

)

• Generate code (ignore message about Platform settings)

At this point the project can be built using `make'

make
...
   text    data     bss     dec     hex filename
  78816     280   10968   90064   15fd0 build/LoRaWAN_End_Node.elf
arm-none-eabi-objcopy -O ihex build/LoRaWAN_End_Node.elf build/LoRaWAN_End_Node.hex
arm-none-eabi-objcopy -O binary -S build/LoRaWAN_End_Node.elf build/LoRaWAN_End_Node.bin

The demo uses the following connection parameters

EU_863_870 Default frequency plan for Europe

Link Layer TS001-1.0.4 + Regional Parameters RP002-1.0.1

Product page

User manual

Schematic

MCU product page

Software page

Software repository

Software guide

STM32WL LoRaWAN_End_Node