This is an old revision of the document!
Table of Contents
EasyLink M-mini
Pinout
1 3V3 x GND x USB+ x USB- x RX x TX x RESET_SW x SYS_LED SPI_CLK x x NET_POW SPI_MISO x x NET_TX- SPI_MOSI x x NET_TX+ IO6/TDI x x NET_RX- IO7/TDO x x NET_RX+ TCK x x IO18 IO8/TMS x x IO19 RESET x x IO20
Console
There is a low voltage serial console on RX/TX running at 115,200 bits per second. A cp2102 interface can be utilised to connect.
_______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r40555) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao -----------------------------------------------------
GPIO
root@Easy-link:/# cat /sys/kernel/debug/gpio GPIOs 0-29, ath79: gpio-8 (USB power ) out hi gpio-11 (reset ) in lo gpio-20 (sd-reset ) in lo gpio-27 (elink:green:system ) out lo
WiFi
First discover the SID.
ifconfig wlan0 up iwlist scan | & grep M-MINI ESSID:"M-MINI_030DA4" ifconfig wlan0 down
Now we may create a connection profile.
#auto wlan0 iface wlan0 inet static address 192.168.1.100 wireless-retry 20 wireless-channel 6 wireless-essid M-MINI_030DA4 wpa-ap_scan 1 wpa-key_mgmt NONE wpa-ssid M-MINI_030DA4
And then, connect.
ifup wlan0 nmap 192.168.1.1 Starting Nmap 6.00 ( http://nmap.org ) at 2015-01-02 12:58 GMT Nmap scan report for 192.168.1.1 Host is up (0.0026s latency). Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 53/tcp open domain 80/tcp open http Nmap done: 1 IP address (1 host up) scanned in 38.53 seconds