Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
boards:yl34 [2021/11/17 15:26] darronboards:yl34 [2022/11/10 21:51] (current) – [JTAG] darron
Line 1: Line 1:
 ==== YL-34 ==== ==== YL-34 ====
- 
 <wrap right> <wrap right>
-{{:boards:mega16_minimium_system_schematic.jpg?200}} +{{:boards:mega16_minimium_system_schematic.jpg?100}} {{:boards:atmega32.jpg?100}}
-{{:boards:atmega32.jpg?200}}+
 </wrap> </wrap>
  
 Known as some variation of YL-34 ATMEGA16 ATMEGA32 AVR Minimum System Development Board. Known as some variation of YL-34 ATMEGA16 ATMEGA32 AVR Minimum System Development Board.
  
 +===ISP===
 +
 +==USBASP==
 +<wrap right>
 +{{:boards:yl-40.jpg?100}}
 +</wrap>
 +
 +<code>
 +avrdude -B 50 -c usbasp -p ATMEGA32
 +
 +avrdude: set SCK frequency to 16000 Hz
 +avrdude: AVR device initialized and ready to accept instructions
 +
 +Reading | ################################################## | 100% 0.01s
 +
 +avrdude: Device signature = 0x1e9502 (probably m32)
 +
 +avrdude: safemode: Fuses OK (E:FF, H:19, L:FF)
 +
 +avrdude done.  Thank you.
 +</code>
 +
 +===JTAG===
 +
 +==ATMEL ICE==
 +<wrap right>
 +{{interfaces:ice-jtag.jpg?100}}
 +</wrap>
 +
 +<code>
 +avrdude -B 5 -c atmelice -p ATMEGA32
 +
 +avrdude: AVR device initialized and ready to accept instructions
 +
 +Reading | ################################################## | 100% 0.08s
 +
 +avrdude: Device signature = 0x1e9502 (probably m32)
 +
 +avrdude: safemode: Fuses OK (E:FF, H:19, L:FF)
 +
 +avrdude done.  Thank you.
 +</code>
 +
 +<code>
 +avrdude  -B 1 -c atmelice -p ATMEGA32
 +
 +avrdude: AVR device initialized and ready to accept instructions
 +
 +Reading | ################################################## | 100% 0.08s
 +
 +avrdude: Device signature = 0x1e9502 (probably m32)
 +
 +avrdude: safemode: Fuses OK (E:FF, H:99, L:E1)
 +
 +avrdude done.  Thank you.
 +</code>
 +===Resources===
 +
 +[[https://eleccelerator.com/fusecalc/fusecalc.php?chip=atmega32&LOW=FF&HIGH=19&LOCKBIT=FF|Fuse calculator]]
 +
 +[[https://ww1.microchip.com/downloads/en/DeviceDoc/doc2503.pdf|ATmega32 datasheet]]