Differences

This shows you the differences between two versions of the page.

--- boards:xino [2014/12/16 22:24] – darron
+++ boards:xino [2017/01/26 04:07] (current) – [XINO Basic for PIC] darron
@@ Line 1: / Line 1: @@
-==== Xino basic for PIC ====
+==== XINO Basic for PIC ====
-{{ :boards:xino2.jpg?300 }}
+<wrap right>
+{{ :boards:xino2.jpg?200}}
+</wrap>
-The XINO Basic for PIC/PICAXE is compatible with any 18-pin device which has a UART with RX on pin 8 and TX on pin 11 (Eg. 16F88 but not 16F627) and has an internal oscillator. The on-board XTAL is not connected to the 18-pin socket.
+The XINO Basic for PIC/PICAXE is compatible with any 18-pin device which has a UART with RX on pin 8 and TX on pin 11 (Eg. 16F88 but not 16F627) with an internal oscillator; the on-board XTAL is not connected to the 18-pin socket.
 All 28-pin devices should be compatible which have a UART on pins 17 and 18.
-(This product has been discontinued).
-== PIC16F88 (INSTEAD OF PICAXE 18M2 / PIC16F1847) ==
+=== PIC16F88 pinout ===
+The device was designed for the PICAXE 18M2 / PIC16F1847.
 <code>
 RA2 AN2 VREF- CVREF 1----18 RA1 AN1
@@ Line 21: / Line 23: @@
 </code>
-== I/O ==
+=== I/O ===
 <code>
 HEADER
@@ Line 59: / Line 61: @@
 </code>
-== PIC18F2320 (INSTEAD OF PICAXE 28X2 / PIC18F25K22) ==
+=== PIC18F2320 pinout ===
+The device was designed for the PICAXE 28X2 / PIC18F25K22.
 <code>
 !MCLR VPP               1----28 RB7 KBI3 PGD
@@ Line 77: / Line 80: @@
 </code>
-== I/O ==
+=== I/O ===
 <code>
 HEADER