Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| boards:xino [2014/12/16 22:21] – darron | boards:xino [2017/01/26 04:07] (current) – [XINO Basic for PIC] darron | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ==== Xino basic for PIC ==== | + | ==== XINO Basic for PIC ==== |
| - | {{: | + | <wrap right> |
| - | The XINO Basic for PIC/PICAXE is compatible with any 18-pin device which has a | + | {{ : |
| - | UART with RX on pin 8 and TX on pin 11 (Eg. 16F88 but not 16F627) | + | </ |
| - | internal oscillator. The on-board XTAL is not connected to the 18-pin socket. | + | |
| + | The XINO Basic for PIC/PICAXE is compatible with any 18-pin device which has a UART with RX on pin 8 and TX on pin 11 (Eg. 16F88 but not 16F627) | ||
| All 28-pin devices should be compatible which have a UART on pins 17 and 18. | All 28-pin devices should be compatible which have a UART on pins 17 and 18. | ||
| - | (This product has been discontinued). | ||
| - | == PIC16F88 | + | === PIC16F88 |
| + | The device was designed for the PICAXE 18M2 / PIC16F1847. | ||
| < | < | ||
| RA2 AN2 VREF- CVREF 1----18 RA1 AN1 | RA2 AN2 VREF- CVREF 1----18 RA1 AN1 | ||
| Line 22: | Line 23: | ||
| </ | </ | ||
| + | === I/O === | ||
| < | < | ||
| HEADER | HEADER | ||
| Line 59: | Line 61: | ||
| </ | </ | ||
| - | == PIC18F2320 | + | === PIC18F2320 |
| + | The device was designed for the PICAXE 28X2 / PIC18F25K22. | ||
| < | < | ||
| - | |||
| - | PINOUT | ||
| - | ------ | ||
| !MCLR VPP | !MCLR VPP | ||
| RA0 AN0 | RA0 AN0 | ||
| Line 78: | Line 78: | ||
| RC2 CCP1 P1A 13 16 RC5 SDO | RC2 CCP1 P1A 13 16 RC5 SDO | ||
| RC3 SCK SCL | RC3 SCK SCL | ||
| + | </ | ||
| + | === I/O === | ||
| + | < | ||
| HEADER | HEADER | ||
| ------ | ------ | ||
