You are here: start » boards » wiotracker

Differences

This shows you the differences between two versions of the page.

--- boards:wiotracker [2024/09/11 12:27] – [Firmware] darron
+++ boards:wiotracker [2024/12/12 21:59] (current) – darron
@@ Line 5: / Line 5: @@
 </wrap>
-Wio Tracker 1110 Dev Board for Meshtastic
+Wio Tracker 1110 Dev Board for [[tools:meshtastic|Meshtastic]]
+The onboard module contains a Semtech LR1110 and Nordic nRF52840.
 ===Firmware===
@@ Line 19: / Line 20: @@
    * Download UF2 file from [[https://flasher.meshtastic.org/|here]].
-   * Double tap reset and mount drive.
+   * Double tap reset to enter DFU mode.
+   * Mount drive.
    * Copy UF2 file to drive and it will reboot after a moment with updated firmware.
-   * Unmount dead drive.
+   * Unmount drive.
+NB Drive will automatically mount and unmount when using Windows.
+===Configure===
+Configure using the [[/tools:meshtastic#command_line_interface|CLI]].
+===Use===
+Pair device with phone and use the [[https://play.google.com/store/apps/details?id=com.geeksville.mesh&hl=en-US|app]].
+===LED===
+RED
+<code>
+P1.01 3V3B SENSOR POWER
+</code>
+GREEN
+<code>
+FLASH    NO BATTERY
+CHARGING ON
+CHARGED  OFF
+</code>
+BLUE
+<code>
+P0.06 LED_BLUE GENERAL PURPOSE
+</code>
+===Resources===
+[[https://www.seeedstudio.com/Wio-Tracker-1110-Dev-Board-for-Meshtastic-p-5914.html|Product page]]
+[[https://files.seeedstudio.com/products/SenseCAP/Wio-Tracker/Wio%20Tracker%201110%20v1.0_SCH_PDF_20230822.pdf|Schematic]]
-NB Drive will be automatically mounted and unmounted if using Windows.