You are here: start » boards » stm32vl

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
boards:stm32vl [2022/11/22 10:16] – [Issues] darronboards:stm32vl [2023/12/01 04:40] (current) – [Issues] darron
Line 50: Line 50:
 ===Issues=== ===Issues===
  
-This device is recognised as a mass storage device which doesn't actually work +This device is recognised as a mass storage device which doesn't actually work. 
-so in Linux add this on the RPi to cmdline.txt and reboot.+ 
 +On the RPi add the following to /boot/cmdline.txt and reboot.
  
 <code> <code>
 usb-storage.quirks=483:3744:i,483:374b:i,483:374e:i usb-storage.quirks=483:3744:i,483:374b:i,483:374e:i
 +</code>
 +
 +With ARMBIAN, update /boot/armbianEnv.txt and reboot.
 +
 +<code>
 +usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u,0x0483:0x3744:i,0x0483:0x374b:i,0x0483:0x374e:i
 </code> </code>
  
Line 104: Line 111:
 == STLink == == STLink ==
  
-NB STLink no longer operates with this boards firmware.+NB STLink no longer operates with this board's firmware.
  
 Install [[:tools:stlink|STLink]] programmer. Install [[:tools:stlink|STLink]] programmer.
Line 174: Line 181:
 [[https://www.st.com/resource/en/reference_manual/rm0041-stm32f100xx-advanced-armbased-32bit-mcus-stmicroelectronics.pdf|MCU reference manual]] [[https://www.st.com/resource/en/reference_manual/rm0041-stm32f100xx-advanced-armbased-32bit-mcus-stmicroelectronics.pdf|MCU reference manual]]
  
 +[[https://www.st.com/resource/en/errata_sheet/es093-stm32f100x4-stm32f100x6-stm32f100x8-and-stm32f100xb-low-and-mediumdensity-value-line-device-errata-stmicroelectronics.pdf|MCU errata]]