Differences

This shows you the differences between two versions of the page.

--- boards:rkp28sb [2016/02/17 14:15] – external edit 127.0.0.1
+++ boards:rkp28sb [2024/07/10 12:26] (current) – external edit 127.0.0.1
@@ Line 51: / Line 51: @@
 :RB3/AN4       RB3 AN9  CCP2  VPO
 :RB4/AN5       RB4 KBI0 AN11
+SCK on J8 connects to LED D3
 </code>
@@ Line 56: / Line 58: @@
 Power may be applied through the power jack or the power header. There are two LDOs and a jumper is used to select the MCU voltage between 3V3 or 5V. When applying 5V on the power header, the 3V3 LDO is still utilised so it may be selected.
+When using the power jack socket, the switch will turn the board on and off, as it
+feeds the 5V LDO.
 There is a VUSB selection jumper which may power this pin if the PIC internal regulator is disabled. For PICs that are not USB, remove the jumper and use this a method of accessing pin 14.
 === Resources ===
-[[http://wiki.kewl.org/downloads/RKP28sbComponentListandInstructions.pdf|Constructors guide]]\\
+{{downloads:RKP28sbComponentListandInstructions.pdf|Constructors guide}]
-[[http://wiki.kewl.org/downloads/rkp28sbschematicshieldforpicaxe.pdf|Schematic]]
+{{downloads:rkp28sbschematicshieldforpicaxe.pdf|Schematic}}