You are here: start » boards » mspexp430g2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
boards:mspexp430g2 [2023/10/20 16:53] – darronboards:mspexp430g2 [2024/07/10 12:22] (current) – external edit 127.0.0.1
Line 36: Line 36:
 P2.2                                          P2.3 P2.2                                          P2.3
  
-                                               GND 
 P1.3   P1.0 P1.6                   RESET       GND P1.3   P1.0 P1.6                   RESET       GND
-S2     LED1 LED2                   S1          VCC +S2     LED1 LED2                   S1          GND 
-       RED  GREEN+       RED  GREEN                              VCC
 </code> </code>
  
Line 86: Line 85:
 When attaching the 32768 Hz crystal, R28 and R29 can be removed to disable header access to XIN and XOUT. When attaching the 32768 Hz crystal, R28 and R29 can be removed to disable header access to XIN and XOUT.
  
-The through holes can be used to attach a generic [[https://wiki.kewl.org/downloads/Ta-1082.pdf|crystal]] +The through holes can be used to attach a generic {{downloads:Ta-1082.pdf|crystal}} 
-which is easier to solder that the SMD crystal.+which is easier to solder than the SMD crystal.
 === Schematics === === Schematics ===
  
Line 104: Line 103:
  
 [[https://www.ti.com/product/MSP430G2553|MSP430G2553 product page]] [[https://www.ti.com/product/MSP430G2553|MSP430G2553 product page]]
 +
 +[[https://www.ti.com/lit/pdf/slau144|MSP430F2xx, MSP430G2xx Family User's Guide]]
  
 [[https://www.ti.com/lit/ug/slau646f/slau646f.pdf|MSP430-GCC user's guide]] [[https://www.ti.com/lit/ug/slau646f/slau646f.pdf|MSP430-GCC user's guide]]