Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
boards:moteino [2021/11/23 11:44] – [Issues] darronboards:moteino [2024/09/02 11:26] (current) – [Issues] darron
Line 30: Line 30:
  
 The board has been tested to work at 2.5V and will transmit at The board has been tested to work at 2.5V and will transmit at
-this frequency even with the 16 MHz XTAL, however, the Moteino +this frequency even with the 16 MHz XTAL, however, the boot-loader 
-boot-loader has a BOR setting of 2V7 which means it +has a BOR setting of 2V7 which means it will continually reboot at 
-will continually reboot at around 2.9V which is as the top of the +around 2.9V which is at the top of the BOR range for 2V7. The ATmega 
-BOR range for 2V7. The ATmega and SX1276 can operate at 1.8V +and SX1276 can operate at 1.8V minimum.
-minimum.+
 ===Pinout=== ===Pinout===
 <wrap right> <wrap right>
Line 180: Line 179:
  
 [[https://www.hoperf.com/data/upload/portal/20190801/RFM95W-V2.0.pdf|RFM95W datasheet]] [[https://www.hoperf.com/data/upload/portal/20190801/RFM95W-V2.0.pdf|RFM95W datasheet]]
 +
 +[[https://eleccelerator.com/fusecalc/fusecalc.php?chip=atmega328p|ATMega fuse calculator]]