You are here: start » boards » lrwan2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
boards:lrwan2 [2024/08/09 22:40] – [P-NUCLEO-LRWAN2] darronboards:lrwan2 [2024/09/19 14:47] (current) – [Resources] darron
Line 1: Line 1:
 ====P-NUCLEO-LRWAN2==== ====P-NUCLEO-LRWAN2====
 <wrap right> <wrap right>
-{{boards:lrwan2.jpg?200}}+{{boards:lrwan2.jpg?100}}
 </wrap> </wrap>
  
-This is a pack containing four boards utilising STM32 +This is a HF demo kit which contains a [[boards:f746zg|NUCLEO-F746ZG]] with a [[interfaces:risinghf|RisingHF LRWAN GS HF1]] LoRaWAN gateway, and a [[boards:l073rz|NUCLEO-L073RZ]] with a [[lrwan1|I-NUCLEO-LRWAN1]] LoRaWAN sensor node.
-processors. +
- +
-Two boards combine as a LoRaWAN gateway and the two others +
-combine as LoRaWAN client. +
- +
-This product is considered obsolete since the firmware on +
-the gateway has not been updated since 2018 and it is not +
-compatible with modern services, however, it operates correctly +
-with [[:tools:lorawan-server|LoRaWAN Server]]. +
-===Setup=== +
- +
-Connect the the ethernet and power the LoRaWAN plugin board on the gateway +
-package using a 5V PSU. An RPi3 PSU is ideal. +
- +
-The ST-LINK port will act as a terminal which is used to configure the gateway +
-from a PC. +
- +
-<code> +
-$ picocom -b 115200 /dev/ttyACM1 +
-</code> +
- +
-==Boot== +
- +
-<code> +
-    _/_/_/    _/_/_/    _/_/_/  _/_/_/  _/      _/    _/_/_/  _/    _/  _/_/_/ +
-   _/    _/    _/    _/          _/    _/_/    _/  _/        _/    _/  _/ +
-  _/_/_/      _/      _/_/      _/    _/  _/  _/  _/  _/_/  _/_/_/_/  _/_/_/ +
- _/    _/    _/          _/    _/    _/    _/_/  _/    _/  _/    _/  _/ +
-_/    _/  _/_/_/  _/_/_/    _/_/_/  _/      _/    _/_/_/  _/    _/  _/ +
- +
-Powered by RisingHF & STMicroelectronics +
-------------------------------------------------------------------------------- +
-           VERSION: 2.1.7, Nov  6 2018 +
-               LOG: OFF +
-           AT ECHO: ON +
-          BAUDRATE: 115200bps +
-           MACADDR: xx:xx:xx:xx:xx:xx +
-          ETHERNET: DHCP +
-              DNS1: 114.114.114.114 +
-              DNS2: 8.8.8.8 +
-        NTP SERVER: 1.ubuntu.pool.ntp.org +
-       EUI PADDING: {3, FF}, {4, FF} +
-        GATEWAY ID: xxxxxxxxxxxxxxxx +
-           LORAWAN: Public +
-    LORAWAN SERVER: eu1.loriot.io +
-   UPLINK UDP PORT: 1780 +
- DOWNLINK UDP PORT: 1780 +
-          CHANNEL0: 867100000, A, SF7/SF12, BW125KHz    (LORA_MULTI_SF) +
-          CHANNEL1: 867300000, A, SF7/SF12, BW125KHz    (LORA_MULTI_SF) +
-          CHANNEL2: 867500000, A, SF7/SF12, BW125KHz    (LORA_MULTI_SF) +
-          CHANNEL3: 867700000, A, SF7/SF12, BW125KHz    (LORA_MULTI_SF) +
-          CHANNEL4: 867900000, A, SF7/SF12, BW125KHz    (LORA_MULTI_SF) +
-          CHANNEL5: 868100000, B, SF7/SF12, BW125KHz    (LORA_MULTI_SF) +
-          CHANNEL6: 868300000, B, SF7/SF12, BW125KHz    (LORA_MULTI_SF) +
-          CHANNEL7: 868500000, B, SF7/SF12, BW125KHz    (LORA_MULTI_SF) +
-          CHANNEL8: 868300000, B, SF7, BW250KHz         (LORA_STANDARD) +
-          CHANNEL9: 868800000, B, 50Kbps                (FSK) +
-------------------------------------------------------------------------------- +
-Concentrator starting... +
-Concentrator Radio A type SX1257 +
-Concentrator Radio B type SX1257 +
-Concentrator started (2926ms) +
-ST LoRa GW V2 +
-Ethernet starting... +
-Ethernet started +
-DHCP IP: 192.168.0.254 +
-Downlink UDP Connected +
-Uplink UDP Connected +
-</code> +
- +
-==Help== +
- +
-<code> +
-AT+HELP +
-+HELP: OK +
- +
-         AT -- AT Ping +
- +
-       HELP -- Print command list +
-                   -> AT+HELP +
- +
-   FDEFAULT -- Restore factory default +
-                   -> AT+FDEFAULT +
- +
-      RESET -- Reset gateway +
-                   -> AT+RESET +
- +
-        SYS -- Check device configuration +
-                   -> AT+SYS +
- +
-        VER -- Version +
-                   -> AT+VER +
- +
-        LOG -- Logging +
-                   -> AT+LOG +
-                   -> AT+LOG=ON +
-                   -> AT+LOG=OFF +
- +
-       ECHO -- AT echo on/ff +
-                   -> AT+ECHO +
-                   -> AT+ECHO=ON +
-                   -> AT+ECHO=OFF +
- +
-        MAC -- MAC address +
-                   -> AT+MAC +
-                   -> AT+MAC=mac_address +
- +
-         IP -- Gateway DHCP/STATIC ip +
-                   -> AT+IP +
-                   -> AT+IP=DHCP +
-                   -> AT+IP=STATIC,ip,netmask,gateway +
- +
-        DNS -- DNS record +
-                   -> AT+DNS +
-                   -> AT+DNS=dns1,dns2 +
- +
-        NTP -- NTP server address +
-                   -> AT+NTP +
-                   -> AT+NTP=ntp_server_address +
- +
-        EUI -- MACADDRESS (EUI48) to EUI64 padding +
-                   -> AT+EUI +
-                   -> AT+EUI=pos0,val0_hex,pos1,val1_hex +
- +
-    LORAWAN -- LORAWAN Public/Private +
-                   -> AT+LORAWAN +
-                   -> AT+LORAWAN=PUBLIC +
-                   -> AT+LORAWAN=PRIVATE +
- +
-     PKTFWD -- Packet forwarder server address and port +
-                   -> AT+PKTFWD +
-                   -> AT+PKTFWD=address,port_up,[port_down] +
- +
-         CH -- Packet forwarder channels +
-                   -> AT+CH +
-                   -> AT+CH=0~7,freq,radio                 // Set multi SF LoRa channel +
-                   -> AT+CH=8,freq,radio,sf,bw             // Set standard LoRa channel +
-                   -> AT+CH=9,freq,radio                   // Set FSK channel +
-                   -> AT+CH=0~9,0                          // Turn off a channel +
-                   -> AT+CH=0~9,OFF                        // Turn off a channel +
-                   -> AT+CH=EU868|US915|EU433|CN780|AU915|AS923|KR920|CN470|IN866|CN470PREQUEL +
- +
-   BAUDRATE -- UART baudrate +
-                   -> AT+BAUDRATE +
-                   -> AT+BAUDRATE=new_br                         // MAX 4000000bps +
-</code> +
- +
-===LoRaWAN Server=== +
- +
-[[tools:lorawan-server|Setup]] the server then create a connection. +
- +
-<code> +
-AT+PKTFWD=192.168.0.115,1680,1680 +
-+PKTFWD: 192.168.0.115, 1680, 1680 +
-AT+RESET +
-</code> +
- +
-===Client=== +
- +
-TODO+
  
 ===Resources=== ===Resources===
Line 172: Line 12:
 [[https://www.st.com/resource/en/user_manual/um2587-getting-started-with-the-pnucleolrwan2-and-pnucleolrwan3-starter-packs-stmicroelectronics.pdf|User manual]] [[https://www.st.com/resource/en/user_manual/um2587-getting-started-with-the-pnucleolrwan2-and-pnucleolrwan3-starter-packs-stmicroelectronics.pdf|User manual]]
  
-[[https://www.st.com/en/evaluation-tools/nucleo-f746zg.html|NUCLEO-F746ZG Product page]] +[[https://www.thethingsnetwork.org/docs/gateways/st/|The Things Network]]
- +
-[[https://www.st.com/resource/en/user_manual/um1974-stm32-nucleo144-boards-mb1137-stmicroelectronics.pdf|NUCLEO-F746ZG User Manual]] +
- +
-[[https://www.hackster.io/felipsz/how-set-up-st-lora-discovery-boards-with-lorawan-a1d2ab|HOWTO]]+