You are here: start » boards » l4p5zg

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
boards:l4p5zg [2024/08/06 14:37] – [NUCLEO-L4P5ZG] darronboards:l4p5zg [2024/11/09 05:23] (current) – [NUCLEO-L4P5ZG] darron
Line 9: Line 9:
 </wrap> </wrap>
  
-This is an STM32 L4+ development board with an STM32L4P5ZGT6U MCU +This is an ARM Cortex-M4 STM32 L4+ development board with an STM32L4P5ZGT6U MCU 
-with a USB OTG port.+at 120 MHz with 1 MB FLASH and 320 KB RAM.
  
-The L4+ series is supported by TinyUSB with its dwc2 driver.+It has a USB OTG port and L4+ USB is supported by TinyUSB with its dwc2 driver.
  
 ===Pinout=== ===Pinout===
Line 51: Line 51:
  
 [[https://www.st.com/resource/en/schematic_pack/mb1312-l4p5zg-a03_schematic.pdf|Schematic]] [[https://www.st.com/resource/en/schematic_pack/mb1312-l4p5zg-a03_schematic.pdf|Schematic]]
 +
 +[[https://www.st.com/en/microcontrollers-microprocessors/stm32l4p5zg.html|MCU product page]]
  
 [[https://www.st.com/resource/en/datasheet/stm32l4p5zg.pdf|MCU data-sheet]] [[https://www.st.com/resource/en/datasheet/stm32l4p5zg.pdf|MCU data-sheet]]