Differences

This shows you the differences between two versions of the page.

--- boards:l073rz [2024/08/12 11:16] – darron
+++ boards:l073rz [2024/09/10 18:15] (current) – [ST-LINK] darron
@@ Line 1: / Line 1: @@
 ====NUCLEO-L073RZ====
+MHz STM32L073RZ Cortex-M0+ with 192 KB flash and 20 KB RAM.
 <wrap right>
 {{boards:lrwan2.jpg?100}}
 \\ \\
-{{boards:ardl073rz.jpg?100}}
+{{boards:l073rz-front.jpg?100}}
 \\ \\
 {{boards:l073rz-back.jpg?100}}
+\\ \\
+{{boards:ardl073rz.jpg?100}}
+\\ \\
+{{boards:stlinkdaughter.jpg?100}}
 </wrap>
+===Pinout===
+<code>
+PC10 USART4_TX
+PC11 USART4_RX
+CN3 STLINK RX
+CN3 STLINK TX
+</code>
+===Solder bridges===
+==USART==
+__Default for standalone NUCLEO-L073RZ__
+SB13 and SB14 ON, SB62 and SB63 OFF
+<code>
+PA2 USART2_TX ST-LINK RX
+PA3 USART2_RX ST-LINK TX
+</code>
+__Default for NUCLEO-L073RZ with [[lrwan1|I-NUCLEO-LRWAN1]]__
+SB13 and SB14 OFF, SB62 and SB63 ON
+<code>
+PA2 USART2_TX ARD D1 TX
+PA3 USART2_RX ARD D0 RX
+</code>
+===ST-LINK===
+By removing the two jumpers at CN2, the ST-LINK interface can be used
+to program another board such as the  [[lrwan1|I-NUCLEO-LRWAN1]] daughterboard.
+<code>
+VDD TARGET
+SWCLK
+GND
+SWDIO
+NRST
+SWO (RESERVED)
+</code>
 ===Resources===
@@ Line 14: / Line 64: @@
 [[https://www.st.com/resource/en/user_manual/um1724-stm32-nucleo64-boards-mb1136-stmicroelectronics.pdf|User manual]]
+[[https://www.st.com/resource/en/schematic_pack/mb1136-default-c04_schematic.pdf|Schematic]]
 [[https://www.st.com/resource/en/datasheet/stm32l073rz.pdf|MCU data-sheet]]