Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
boards:k8048 [2014/12/17 14:24] darronboards:k8048 [2015/03/22 21:55] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ==== Velleman K8048 ==== ==== Velleman K8048 ====
-{{ :boards:16f88.jpg?300}}+<wrap right> 
 +{{:boards:16f88.jpg?200}} 
 +</wrap>
  
-The Velleman K8048 is long standing board that incorporates a serial bit-banging programmer and simple experimenter's I/O of LEDs and switches.+The Velleman K8048 is long-standing board that incorporates a serial port programmer and experimenter's I/O section of LEDs and switches
 + 
 +Although the interface connects to the serial port, it doesn't utilise 
 +the RS-232 serial protocol and instead programming is performed using bit-banging.
  
-[[http://www.velleman.eu/products/view/?id=350903|Velleman K8048]] 
  
-== Serial Interface ==+=== Serial Interface ===
  
-The Velleman programmer board has the following serial interface+The bit-bang programmer has the following serial interface
 characteristics (D-SUB-9). characteristics (D-SUB-9).
  
Line 27: Line 31:
  9:RI  9:RI
 </code> </code>
- 
-Although the interface connects to the serial port, it doesn't utilise 
-the RS-232 serial protocol and instead I/O is performed with bit banging. 
  
 Data output bits are sent through the DTR line and clocked on the falling Data output bits are sent through the DTR line and clocked on the falling
Line 41: Line 42:
  
  
-== Socket Cross Reference ==+=== Socket Cross Reference ===
  
 <code> <code>
Line 83: Line 84:
 </code> </code>
  
-== ICSP ==+=== ICSP ===
  
 <code> <code>
- SK3 is an ICSP port, the pins are arranged as follows: + SK3
- +
- ICSP+
  ---------  ---------
  5 4 3 2 1  5 4 3 2 1
Line 97: Line 96:
  4:PGD  4:PGD
  5:PGC  5:PGC
-</code> 
  
-<code> + Voltage levels (No chip installed, no D-SUB-9 connection) 
- ICSP voltage levels (No chip installed, no D-SUB-9 connection) + ---------------------------------------------------------
- --------------------------------------------------------------+
  
  Switch set to RUN.  Switch set to RUN.
Line 127: Line 124:
  5:PGC          5V  5:PGC          5V
 </code> </code>
 +
 +=== Resources ===
 +[[http://www.velleman.eu/products/view/?id=350903|Velleman K8048]]
 +
 +