You are here: start » boards » frdm

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
boards:frdm [2022/12/13 01:44] – [Programming] darronboards:frdm [2024/07/10 12:21] (current) – external edit 127.0.0.1
Line 16: Line 16:
 </code> </code>
  
-One day I may solder them in place.+One day I will solder them in place.
  
-=== Bootloader ===+=== Firmware ===
  
-Out the box this board doesn't work with anything resembling a modern +Out of the box this board doesn't work with anything resembling a modern 
-day computer.+day computer so I never used it until 8 years after buying it in 2014.
  
-You have to download new firmware to upgrade it from version 0.11 +Without an upgrade it doesn't work in any variety of Linux or Windows after 7. 
-to something higher. Somehow I managed to get it working using +The fact that it doesn't work with anything except XP and 7 means it's 
-Windows XP in a VirtualBox VM.+very hard to upgrade.
  
-Once that magically worked I updated it to J-Link for NXP.+You have to download new firmware to upgrade the bootloader from version 0.11 
 +to something higher that will work with a modern PC. Somehow I managed to get it 
 +to upgrade using Windows XP in a VirtualBox VM. 
 + 
 +Once the upgrade magically worked I further updated it from OpenSDA to J-Link for NXP. 
 + 
 +The files I think I used to proceed were (I have a bad memory but this is probably close): 
 + 
 +<code> 
 +DEBUG-APP_Pemicro_v108.SDA 
 +BOOTUPDATEAPP_Pemicro_v111.SDA 
 +12_OpenSDA_FRDM-KL25Z.bin 
 +</code>
  
 Good luck. Good luck.
Line 106: Line 118:
 === Resources === === Resources ===
  
-[[https://wiki.kewl.org/downloads/FRMD-KL25Z.pdf|Manual and schematic]]+{{:downloads:FRMD-KL25Z.pdf|Manual and schematic}}