Differences

This shows you the differences between two versions of the page.

--- projects:wellington [2017/02/08 21:46] – [Configure] darron
+++ projects:wellington [2017/03/11 02:00] (current) – [Devices] darron
@@ Line 14: / Line 14: @@
 === Devices ===
-At this time 188 devices are thought to be supported and here is a list
+At this time 192 devices are thought to be supported and here is a list
 of devices which have been tested during the production of this boot loader.
+<columns 50% 50% ->
 <code>
+pic18f13k50
 pic18f25k22
+pic18f25k50
+pic18f26j50
 pic18f26k20
 pic18f26k40
+</code>
+<newcolumn>
+<code>
 pic18f26k80
 pic18f4520
@@ Line 27: / Line 37: @@
 pic18f4685
 </code>
+</columns>
 The pic18f26k80 and pic18f4685 support both serial and CAN Bus.
@@ Line 40: / Line 52: @@
 I am grateful to Chiculita Claudiu for Tiny PIC Bootloader as Wellington Boot Loader uses a protocol derived from Tiny PIC bootloader.
+=== Checkout ===
+Wellington boot loader is obtained using mercurial.
+<code>
+hg clone http://hg.kewl.org/pub/wellington
+cd wellington
+</code>
 === Configure ===
@@ Line 53: / Line 74: @@
 Follow the guide given in the template to create the correct boot loader
-firmware for your target then build the boot loader. [[:tools:gputils|GPutils]] must be installed to perform this operation.
+firmware for your target then build the boot loader. [[:tools:gputils|GPUtils]] must be installed to perform this operation.
 <code>