Table of Contents
ewp.py: Create Makefile from IAR project
ewp.py converts as best it can IAR project files into GNU Makefiles.
Install
hg clone https://hg.kewl.org/pub/ewp.py cd ewp.py sudo make install
STM32CubeH7 Demo
Fetch Source
git clone --recursive https://github.com/STMicroelectronics/STM32CubeH7
Enter Demo
cd STM32CubeH7/Projects/STM32H745I-DISCO/Applications/FreeRTOS/FreeRTOS_AMP_RTOS_BareMetal/
List Targets
ewp.py . EWARM/Project.ewp STM32H745I_Discovery_CM4 STM32H745I_Discovery_CM7
Create Makefiles
ewp.py -p1 . EWARM/Project.ewp STM32H745I_Discovery_CM4 > Makefile.cm4 ewp.py -p1 . EWARM/Project.ewp STM32H745I_Discovery_CM7 > Makefile.cm7
Fix Makefiles
For each Makefile alter FIXME_CPU and FIXME_ABI for the CPU platform.
In these cases it is cortex-m4, cortex-m7 and hard.
Locate FIXME_LDS and ensure the correct linker script is selected and then remove the FIXME_LDS text.
Change paths to GCC from IAR in the FreeRTOS source and includes entries.
Patch Source (optional)
Apply this patch if you want the backlight to be disabled when running the demo.
--- CM4/Src/main.c.orig 2024-10-07 13:22:39.704687900 +0100
+++ CM4/Src/main.c 2024-10-07 13:24:31.570592100 +0100
@@ -74,6 +74,15 @@
*/
HAL_Init();
+ __HAL_RCC_GPIOK_CLK_ENABLE();
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
+ GPIO_InitStruct.Pin = GPIO_PIN_0;
+ HAL_GPIO_Init(GPIOK, &GPIO_InitStruct);
+ HAL_GPIO_WritePin(GPIOK, GPIO_PIN_0, GPIO_PIN_RESET);
+
BSP_LED_Init(LED1);
BSP_LED_Init(LED2);
Build
make -f Makefile.cm4 make -f Makefile.cm7
Combine HEX
srec_cat build/STM32H745I_Discovery_CM7/STM32H745I_Discovery_CM7.hex -Intel build/STM32H745I_Discovery_CM4/STM32H745I_Discovery_CM4.hex -Intel -out Project.hex -Intel
Program
Program `Project.hex' with STM32CubeProgrammer (attempt using OpenOCD failed and needs investigation).
Notes
The demo FreeRTOS_AMP_Dual_RTOS initially runs ok and then stalls. This is due to newlib memcpy causing an MPU unaligned memory hard fault.
The FreeRTOS_AMP_RTOS_BareMetal demo works fine.
