Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
projects:oxford [2017/02/08 21:34] darronprojects:oxford [2017/02/24 16:31] (current) – [Devices] darron
Line 15: Line 15:
 === Devices === === Devices ===
  
-At this time 475 devices are thought to be supported and here is a list+At this time 489 devices are thought to be supported and here is a list
 of devices which have been tested during the production of this boot loader. of devices which have been tested during the production of this boot loader.
 +
 +<columns 50% 50% ->
  
 <code> <code>
 dsPIC30F1010 dsPIC30F1010
 dsPIC33EP128GP502 dsPIC33EP128GP502
 +dsPIC33EV256GM002
 +dsPIC33EV256GM102
 dsPIC33FJ06GS101A dsPIC33FJ06GS101A
 +dsPIC33FJ128GP802
 dsPIC33FJ16GS502 dsPIC33FJ16GS502
 dsPIC33FJ32MC102 dsPIC33FJ32MC102
 +</code>
 +
 +<newcolumn>
 +
 +<code>
 +
 PIC24F04KA201 PIC24F04KA201
 PIC24F16KL402 PIC24F16KL402
Line 31: Line 42:
 PIC24FJ64GA002 PIC24FJ64GA002
 PIC24FV08KM101 PIC24FV08KM101
 +PIC24FV32KA302
 PIC24HJ128GP502 PIC24HJ128GP502
 +
 </code> </code>
 +
 +</columns>
  
 === Licence === === Licence ===
Line 40: Line 55:
 === Credits and Thanks === === Credits and Thanks ===
  
-Oxford Boot Loader is developed by Darron M Broad with contributions from Gerhard Bertelsmann.+Oxford Boot Loader has been developed by Darron M Broad and is a port of [[:projects:wellington|Wellington]] boot loader developed by Darron M Broad with contributions from Gerhard Bertelsmann.
  
 I am grateful to Chiculita Claudiu for Tiny PIC Bootloader as Oxford Boot Loader uses a protocol derived from Tiny PIC bootloader. I am grateful to Chiculita Claudiu for Tiny PIC Bootloader as Oxford Boot Loader uses a protocol derived from Tiny PIC bootloader.
 +
 +=== Checkout ===
 +
 +Oxford boot loader is obtained using mercurial.
 +
 +<code>
 +hg clone http://hg.kewl.org/pub/oxford
 +cd oxford
 +</code>
  
 === Configure === === Configure ===
Line 61: Line 85:
  
 Follow the guide given in the template files to create the correct boot loader Follow the guide given in the template files to create the correct boot loader
-firmware for your target then build the boot loader.+firmware for your target then build the boot loader. [[:tools:xc16|XC16]] must 
 +be installed to perform this operation.
  
 <code> <code>