| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| projects:mork [2015/03/22 21:55] – external edit 127.0.0.1 | projects:mork [2017/01/12 22:44] (current) – external edit 127.0.0.1 |
|---|
| </wrap> | </wrap> |
| |
| Mork is adaptation of [[:projects:nanu-nanu|Nanu nanu]] Microchip PIC ICSP for the STM32 based [[:boards:vcc-gnd|vcc-gnd]] or [[:boards:maple|Maple mini]]. | This is a Microchip PIC32 ICSP (in circuit serial programmer) for STM32 micro-controllers. Mork allows an STM32 to program the flash on a PIC32. |
| | |
| | Mork is adaptation of [[:projects:nanu-nanu|Nanu nanu]] Microchip PIC ICSP for the STM32 based [[:boards:vcc-gnd|vcc-gnd]] or [[:boards:maple|Maple mini]] (the stm32 F4 discovery is also supported in the build but not documented here). |
| |
| Both STM32 boards are inexpensive boards which don't cost much more than the [[:boards:nano|Nano 3.0]] yet they are far more powerful. | Both STM32 boards are inexpensive boards which don't cost much more than the [[:boards:nano|Nano 3.0]] yet they are far more powerful. |
| |
| One complication though for the [[:boards:vcc-gnd|vcc-gnd]], is that it comes with a serial boot loader which is not accessible via it's USB port. This means that another device is required to program the [[:boards:vcc-gnd|vcc-gnd]] which can be an [[:tools:stlink|STLink]] compatible device or, if using a 3V3 UART, [[:tools:stm32flash|STM32Flash]]. | One complication though for the [[:boards:vcc-gnd|vcc-gnd]], is that it comes with a serial boot loader which is not accessible via its USB port. This means that another device is required to program the [[:boards:vcc-gnd|vcc-gnd]] which can be an [[:tools:stlink|STLink]] compatible device or, if using a 3V3 UART, [[:tools:stm32flash|STM32Flash]]. |
| |
| The [[:boards:vcc-gnd|vcc-gnd]] page shows both examples of programming the board. | The [[:boards:vcc-gnd|vcc-gnd]] page shows both examples of programming the board. |
| Mork is licensed under same terms as [[:projects:pickle|Pickle Microchip PIC ICSP]] which is the source of the software used to create this project. The Pickle [[:projects:pickle:licence|LICENCE]] is found here. This licence details the rights and liabilities of using the application and it should be especially understood that I, the author, will not accept any responsibility for any side effects of running it. Do not download and use this firmware unless you are willing to accept the consequences of it failing for any reason. | Mork is licensed under same terms as [[:projects:pickle|Pickle Microchip PIC ICSP]] which is the source of the software used to create this project. The Pickle [[:projects:pickle:licence|LICENCE]] is found here. This licence details the rights and liabilities of using the application and it should be especially understood that I, the author, will not accept any responsibility for any side effects of running it. Do not download and use this firmware unless you are willing to accept the consequences of it failing for any reason. |
| |
| === Credits === | === Credits and thanks === |
| |
| This software was written by Darron M Broad and is an adaptation of [[:projects:pickle|Pickle Microchip PIC ICSP]]. | This software was written by Darron M Broad and is an adaptation of [[:projects:pickle|Pickle Microchip PIC ICSP]]. |
| |
| | Thanks go to the libopencm3 developers for providing this library. This is used for a number of functions but most importantly, the USB driver. |
| |
| === Install === | === Install === |
| |
| Later versions of Windows are not available to test. | Later versions of Windows are not available to test. |
| | |
