Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| projects:gpio-bb:raspbian [2016/10/23 14:56] – darron | projects:gpio-bb:raspbian [2022/08/01 13:59] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ==== GPIO bit-bang driver for Raspbian (obsolete) ==== | + | ==== Raspbian (obsolete) ==== |
| + | |||
| + | GPIO bit-bang driver for Raspbian. | ||
| === Kernel Config === | === Kernel Config === | ||
| Determine the running kernel and its config on the Raspberry Pi target machine. | Determine the running kernel and its config on the Raspberry Pi target machine. | ||
| + | |||
| < | < | ||
| uname -a | uname -a | ||
| Line 13: | Line 16: | ||
| Examples. | Examples. | ||
| + | |||
| < | < | ||
| Linux pi3 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/ | Linux pi3 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/ | ||
| Line 24: | Line 28: | ||
| Determine the kernel hash for the firmware. | Determine the kernel hash for the firmware. | ||
| + | |||
| < | < | ||
| wget -q https:// | wget -q https:// | ||
| Line 31: | Line 36: | ||
| Examples. | Examples. | ||
| + | |||
| < | < | ||
| 3.6.11+ | 3.6.11+ | ||
| Line 42: | Line 48: | ||
| On the build host fetch the raspberry pi build tools. | On the build host fetch the raspberry pi build tools. | ||
| + | |||
| < | < | ||
| mkdir -p / | mkdir -p / | ||
| Line 49: | Line 56: | ||
| Fetch the kernel source for the previously determined hash. | Fetch the kernel source for the previously determined hash. | ||
| + | |||
| < | < | ||
| rm -Rf / | rm -Rf / | ||
| Line 59: | Line 67: | ||
| Prepare to build kernel and copy over configuration. | Prepare to build kernel and copy over configuration. | ||
| + | |||
| < | < | ||
| make ARCH=arm mrproper | make ARCH=arm mrproper | ||
| Line 65: | Line 74: | ||
| Build the kernel using the raspberry pi build tools. | Build the kernel using the raspberry pi build tools. | ||
| + | |||
| < | < | ||
| make ARCH=arm oldconfig | make ARCH=arm oldconfig | ||
| Line 71: | Line 81: | ||
| Build the GPIO bit-bang module and copy to target machine. | Build the GPIO bit-bang module and copy to target machine. | ||
| + | |||
| < | < | ||
| hg clone http:// | hg clone http:// | ||
| Line 81: | Line 92: | ||
| Install the module on the Raspberry Pi target machine (Eg. 3.12.28+). | Install the module on the Raspberry Pi target machine (Eg. 3.12.28+). | ||
| + | |||
| < | < | ||
| mkdir -p / | mkdir -p / | ||
| Line 91: | Line 103: | ||
| Load modules on target machine. | Load modules on target machine. | ||
| + | |||
| < | < | ||
| / | / | ||
