You are here: start » projects » can-can

Differences

This shows you the differences between two versions of the page.

--- projects:can-can [2014/12/20 23:17] – [Credits and Thanks] darron
+++ projects:can-can [2022/12/07 23:19] (current) – [Documentation] darron
@@ Line 2: / Line 2: @@
 <wrap right>
 {{:projects:humble-can-prototype.jpg?200}}
+\\ \\
+{{:projects:pcb.jpg?200}}
 </wrap>
 The Can-can CAN bus interface is a simple but general purpose interface
-for the Raspberry Pi and OpenWRT.
+for the [[:boards:rpi|Raspberry Pi]] and OpenWRT.
 The interface has two modes of operation.
@@ Line 21: / Line 23: @@
 In this mode, the Can-can interface is a dedicated CAN bus device in
-it's own right. This is placed on the bus to perform special purpose
+its own right. This is placed on the bus to perform special purpose
 duties such as taking measurements and logging events etc.
 In this mode a host mode device is also required for communication.
-==== Credits and Thanks ====
+=== Licence ===
+The Can-can bus interface project is licensed under the [[:projects:can-can:licence|CC BY-NC-SA 4.0]]. You must read and accept the terms of this licence agreement before using any of the licensed materials from this project.
+=== Credits and Thanks ===
 Can-can is developed and maintained by Darron M Broad.
@@ Line 33: / Line 39: @@
 interface which this project has realised.
+=== Documentation ===
+Documentation will appear here soon.
+=== Resources ===
+[[https://ww1.microchip.com/downloads/en/DeviceDoc/20005167C.pdf|MCP2561/2 datasheet]]