This is an old revision of the document!
Table of Contents
Waveshare SX1262 LoRaWAN Hat
Semtech SX1262 based LoRa radio board for RPi.
This LoRa device and configuration is supported by Meshtastic for Linux.
The board can come with or without a GPS receiver.
Config
Raspberry Pi Zero 2W
Kernel
dtparam=spi=on dtoverlay=spi0-0cs enable_uart=1
cmdline
console=tty1 root=PARTUUID=f00a8a2b-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=GB
Meshtastic
Lora: Module: sx1262 # Waveshare SX126X XXXM DIO2_AS_RF_SWITCH: true CS: 21 IRQ: 16 Busy: 20 Reset: 18 GPS: SerialPath: /dev/ttyS0
